RJ45 Surge Protector

Features 1. IEC61000-4-5 and ITU-TK20&K21 2. The high response surge arresters 3. Clamping voltage and low loss against high speed signal 4. Designed by theory of current limited and voltage clamped, discharged to ground 5. Standard:10Base-T/100Base-TX Introduction IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, FL45 made by the high response surge arresters, the advantage allow clamping voltage and low loss against high speed signal, because it had a low capacitance. Designed to protect data communication lines in local and wide area networks up to 100Base-T transmission speeds. Specification Standard: 10Base-T/100Base-T standard 10/100M signal: IEC6100-4-5 and ITU-TK20&21 Nominal discharge current(In):5 KA(8/20S) Working voltage: 0-5V Limit voltage: is less than or equal to 40V Apply Band rate: 100Mbps Connector: RJ45 (F) The line of protection: 4 lines (1, 2, 3, 6) Insert consumption: is less than or equal to 0.5dB Delay time: is less than or equal to 1ns Working temperature:-20 to 60^oC Storage temperature:-25 to 85^oC Humidity: Relative humidity 5% to 95% No power supply needed, No consumption L x W x H: 72mm x 42mm x 25mm Shell: Alnico Color: Blue Weight: 10g Warranty: 5 years Approvals: FCC, CE, RoHS approvals