FUSB-TH floppy drive for embroidery machine
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Product Description
Product Description
Features:
l Use ordinary usb pen driver as the medium for transfer design.
l Same size, same interface with floppy driver, easy to install.
l Connect through floppy driver interface, no need to modify system settings.
l 1.44Mb/720Kb built-in flash memory, used for conversion of file system between usb pen driver and format of floppy disk.
l Files in root directory and 99 folders can be searched.
Function:
Two 8segment LED corresponds with the name of folder, 00 regard as the root directory, and 01 – 99 is for folder. Name of folder must start by a number ‘0’, and then the 00 – 99 , for example, folder name : 028tajima, the ‘tajima’ is named by user.
Two button used to sel ect the 8segment LED from 00 – 99, left is tens-digit, right is single-digit, and after plug a usb pen driver, the two buttons used as IN and OUT instruction. Press the IN button to transfer files from usb pen driver to built-in memory, When the total capacity of files in current directory exceed 1.44Mb/720Kb, press IN button again to transfer files into built-in memory, and the OUT button is used to transfer files from machine to usb pen driver.
Operation:
Read sequence:
|
1.Select root or folder by 2 button (tens/single) before plug usb pen driver.
|
|
2.Plug usb pen driver.
|
|
3. 8segment change to ‘d0’,1-20 seconds later, return back to number of folder
|
|
4.operate machine to read disk.
|
|
5.if total capacity of files in current directory exceed 1.44Mb, and file you need is not in current space, press IN(single), goto step 3 and 4.
|
Write sequence:
|
1.Select root or folder by 2 button (tens/single) before plug usb pen driver
|
|
2.Plug usb pen driver
|
|
3. 8segment change to ‘d0’,1-20 seconds later, return back to number of folder
|
|
4.Press OUT(tens), 8segment change to ‘d1’.
|
|
5.operate machine to write disk.
|
|
6.after the machine display it finished, wait the green lamp off.
|
|
7.press OUT(tens) again, 8segment change to ‘d2’. 1-20 seconds later, return back to number of folder.
|
Description:
1. If there is no folder in usb pen driver correspond with 8segment, it wil
Related Keywords
Related Keywords
You May Also Like
You May Also Like
