Nitrogen lead-free reflow oven ETA-S8-N

ETA Lead-free reflow oven E8


Heating System
> Eight groups of top and bottom forced hot air convection heating zones.
> Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.
> Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.
> Power consumption savings of 1/3 as compared to other systems.
> Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.
> Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.
> Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.
Cooling System
> Two (2) groups of forced air convection cooling zones.
Distortion-free Conveyor System with Automated Chain Lubrication
> Combined pin chain rail and mesh belt conveyor system  (Note: Mesh belt is not available on machines with center board support.)
> Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.
> Automated chain lubrication system with a computer controlled central reservoir.  Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance. 
Fresh Air Recharge System
> Fresh air is supplied to each zone uniformly to provide a rapid process transfer.
Flux Management System
> Air amplifier forces supercharged flux collection and recirculation.
> Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.
Control System
> PC control system with windows based control software.
Additional Features
> Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.
> Motorized hood lift allows easy access to the inside of the oven for service and maintenance.
> Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.
> Swing arm control PC station
> Four (4) emergency stop switches
> Two (2) exhaust ports
> SMEMA interface

> System documentation

smt,smt mounter,lead-free reflow soldering,lead-free reflow oven,wave soldering machine,reflow soldering,wave soldering,smt pick-place achine,smt equipment,wave soldering machine,AOI,Three lacquer coating machine,smt chip mounter,stencil printer,LED glue machine,reflow oven,smt semi-automatic printer,solder paste,smt turnkey solutions,Samsung chip mounter,juki chip mounter,yamaha chip mounter,Panasonic chip mounter,fuji chip mounter,solder reflow, pcb soldering,lead free soldering,lead free solders,pb free soldering,reflow furnace,smt mounter,smt shooter,LED equipment,LED machine,BGA rework station,solder paste,fluxes,Bar Solder, 
ETA Electronic equipment Co.,LTD. was founded in 2000. Now, we have more than 260 employees , more 80 Skillful employees are bachelor degree or above , over 8000M2 manufactory area , all sorts of processing equipment surpass 60 sets, and have a strong ability in research and development and manufacture in SMT.


contact:,smtvivi888@gmail.com ,SKYPE:chinasmtai,www.etasmt.com