Shenzhen Techwin Lightning Technologies Co., Ltd
Shenzhen Techwin Lightning Technologies Co., Ltd
SPD for Network / Data Line Surge Protector
  • SPD for Network / Data Line Surge Protector
SPD for Network / Data Line Surge Protector

SPD for Network / Data Line Surge Protector

$1.00 - $1000.00/Piece/Pieces
Min. Order:
1 Piece/Pieces
Min. Order:
1 Piece/Pieces
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Supply Ability: 2000pcs per day
Payment Type: T/T
Product Description
Product Description

SPD for Network / Data Line Surge Protector
Data line surge protector series are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage. 

Application Of SPD For Network / Data Line Surge Protector

CAT5e and CAT5 compatible

10/100 Base-T Ethernet protection

LAN, FDDI , CDDI, ATM

PDH, SDH, SPDH

Industrial control 

Loss prevention system device; Security system; Security integration.

IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system

Installation And Wiring Diagram Of SPD For Network / Data Line Surge Protector

Specification Of SPD For Network / Data Line Surge Protector

Model D05J4 D05J4-8 D05J4-16 D05J4-24 D05J8H
Lightning projection zone(LPZ) 2
Standards Compliance IEC61000, EN60950, GB/T18802.21-2002, TB/T2311-2002
According to IEC61643 III
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 D
Max continuous operating voltage Uc 5V
Nominal discharge current  (8/20µs)   In 3K
Max discharge current Imax (8/21µs)   Imax 5KA
Voltage protection Level ≤55V
@C2(8/20µs) Up
Voltage protection Level ≤25V
@C3(1kV/µs) Up
Rated load current IL 200mA
Limiting Voltage(10/700µs) ≤20V
Cut-off Frequency  fG 250MHz
Response time tA (LN / N-PE) 1ns
Protection line 1/2,3/6 1/2,3/6,4/5,7/8
Protection port 1 8 16 twenty four 1
Mounting Be Installed between protected equipment and signal line
Adapt Transmission rate                      100Mbps                          1000Mbps
Transmission standards 100BaseT/ 1000BaseT/1000Base TX,CAT5/CAT6
Dimension 190 (H)×85(W)×48(L)mm 482 (H)×86(W)×44(L)mm 83 (H)×25(W)×25(L)mm
85(H)×25(W)×25(L)mm
Interface form RJ45
IP code (IEC EN 60529) IP20
Error rate ≤10-12
Material/color Aluminum/Blue
Insertion loss ≤.3.0dB
Working conditions Temperature: -40 to 85℃, Relative humidity: ≤95%

Features Of SPD For Network / Data Line Surge Protector


Multi. Protection circuits, Gas-Tube+ TVS technology

Dual protection in Common mode and differential mode

TVS array technology, low capacitance

Multi-Strike Capability

RJ45 connector

As one of surge protection companies, we have types of power supply protection devices for sale, if you have needs, please contact us.



Send your message to this supplier

  • Enter between 20 to 4,000 characters.