kingpo needle flame tester

Brief introduction:

Needle flame test is IEC60695 -11-5, GB/T5169.5-2008, GB4706.1-2005 and other standards require the use of small -flame ignition source simulation project .
    Needle flame test apparatus is the required size (Φ0.9mm) of the needle burner. through a specific gas ( butane ) to 45 ° angle combustion test facilities regularly targeted. depending on whether the ignition and held the length of time and fuel burning equipment to assess the internal fault conditions caused by the small flame of fire risk.

Needle flame test apparatus can be used for lighting. low voltage electrical appliances. household appliances. electrical machines, motors, power tools, electronic equipment, electrical instruments. electrical connectors, accessories and other electrical and electronic equipment and parts, components, research. production and quality inspection departments. but also for insulation, plastic or other solid combustible materials industry .

* Thermocouple: K-type Φ0.5mm Accuracy ± 0.05%
* Test procedure: test procedure automatic control, independent ventilation
* Reference standard: IEC60695 -11-5, GB/T5169.5-2008, GB4706.1-2005
* Control: Single-chip microcomputer touch screen + key dual control system. High-precision thermometer stand-alone electronic control system, anti-interference ability.
* Operating efficiency: test control process to achieve one -button operation. Testing fast and efficient.
* Integrated Test Standard: according to the actual testing process to write test procedures

Specifications:

1. needle burner: height greater than 35mm, stainless steel needles Φ0.9mm-Φ0.5mm
2. burner angle : 0 °, 20 °, 45 ° adjustable
3. Shi burning time:0-999999 .9 s ± 0.1s adjustable ( usually selected as the 30s)
4. holding burning time :0-999999 .9 s ± 0.1s, automatic recording. manual pause
5. the flame height : 12mm ± 1mm (with height measurement gauge)
6. Shi gases : butane or propane purity greater than 95%
7. the temperature measuring range : 0 ~ 1000 ℃
8. the flame temperature requirements : from 100 ℃ ± 2 ℃ to 700 ℃ ± 3 ℃ rise time in 23.5 ± 1 s
9. thermocouple : K-type Φ0.5mm Accuracy ± 0.05%.
10. test Background: Black Background.

11. testing process : Test program automatic control. independent ventilation
12. reference standard : IEC60695 -11-5, GB/T5169.5-2008, GB4706.1-2005
13. Test volume: more than 0.5 cubic meters (can be customized according to customer requirements 0.75 cubic or a cubic)
14. dimensions: 1100mm wide × 700mm deep × 1300mm high
15. control: the use of single-chip microcomputer touch screen + key dual control system. high-precision thermometer stand-alone electronic control system, anti-interference ability .
16. operation efficiency : test control process to achieve one -button operation. testing fast and efficient .
17. test standard integration : the preparation process according to the actual test test procedures
18 Auto: automatic ignition .