1. Large output under low pressure;
2. Easy to clean without blocking;
3. Long service life, low price;
4. Wide application.
|
Parameters of UF membrane / Hollow fiber membrane |
||
|
Structure |
Inter-compression (in - outside) |
|
|
Dimension(mm) |
as per your requirement |
|
|
Material |
Upvc, ABS,PP (As per your requirement or provided by yourself) |
|
|
Hollow fiber OD(mm) |
0.9~1.1 |
1.6~1.8 |
|
Membrane material |
PVC(Alloy PVC) |
|
|
Protective solute |
Food grade dry lacquer |
|
|
Preservation condition |
Dry |
|
|
Preservation time |
18 months |
|
|
Molecular weight cutoff (Dalton) |
50000D~100000D |
|
|
Operate mode |
Full amount filtering / cross-flow filtering |
|
|
Adhesive material |
Food grade epoxy resin |
|
|
Membrane's structural characteristics |
Hydrophilic double-dense layer |
|
|
Maximum inlet pressure(Mpa) |
0.6 |
|
|
Maximum transmembrane pressure drop(Mpa) |
0.2 |
|
|
Nomal operate pressure(Mpa) |
0.05~0.4 |
|
|
Integrity air test pressure(Mpa) |
0.15 |
|
|
Back wash pressure(Mpa) |
0.2 |
|
|
Applied temperature(°C) |
2°C ~45°C |
|
|
Membrane area(m²) |
Up to the model |
|
|
Hollow fiber qty.(piece) |
Up to the model |
|
|
Standad design water flux (m ²/h) |
220~260 |
|
|
Design total pure water output (L/ m ²) |
20000~22000 |
|
|
PH range |
2~11 |
|
|
Continuous maximum concentration of residual chlorine (mg/L) |
70 |
|
|
Short-term maximum concentration of chlorine (mg/L) |
200 |
|
|
Produced water turbidity(when raw water turbidity(70NTU) |
0.1 |
|
|
Protection condition |
-20°C -45°C |
|
Related Keywords
