High Transparent Smart PDLC Magic Glass Film

High Transparent Smart PDLC Magic Glass Film 

1. What are the product advantages of Electronic Pdlc Smart Film? 

Advantage 1: It can be electronically controlled, and can be adjusted to two states of transparency and atomization. Smart Glass Film Switchable is mainly made of liquid crystal polymer mixed material injected into the middle of two transparent conductive films, and its light transmittance is as high as 90%. 

Advantage 2: Sunshade, anti-ultraviolet, explosion-proof, relying on liquid crystal dimming film to refract sunlight and take away heat by the way. In the case of exposure to the sun, it can effectively avoid the sultry feeling in the car. The explosion-proof effect is also better than the general explosion-proof membrane. 

Advantage 3: Projection, the opacity in the power-off state, and its milky white and light gray Magic Smart Film has a very good projection effect in the power-off state, and can be viewed on both sides. 

Advantage 4: It is thinner than ordinary film, and it fits better on the glass, and there will be no scratches or folds during the lifting process.

2. Does this dimming glass need to be modified by the car owner? 

Similar to the sticking method of explosion-proof film, plus an electronic modification. Because it needs to be powered on, the two modes of transparency and atomization can be adjusted with one key of electricity.

Technical Principle

In the natural state, the liquid crystal molecules inside it are arranged randomly, the refractive index of liquid crystal is lower than that of the polymer outside, and the incident light scatters in the polymer and is milky white, that is, opaque.After electrification, the droplets in the dispersed liquid crystal polymer are rearranged, and the liquid crystal changes from disorder to directional order, so that the refractive index of the liquid crystal is the same as that of the polymer, and the incident light can completely pass through, forming a transparent state. Intelligent dimming glass can be based on different occasions, such as mood, functional requirements can change the mood of the glass in a flash, the function such as demand can change glass appear a performance in - instantly, truly achieve the "the effect of light with me to move, it also is the magical thing about this state of the user can conveniently control switch, switch or remote control, slightly press can shape the privacy, effectively protect the individual privacy space.

Customized Pdlc Smart Film for Conference Room Installation Tips:

1. Check each piece after your receive and open the carton.

2. Test each piece before you install.

3. Use clean water or alcohol to clean the glass before installation. Never use anything acidity nor alkalinity.

4. The glass must be clean, dry and flat before sticking the smart film.

5. All bubbles should be scraped out.

6. Pls kindly not tear off the tape on the busbar. It can protect the busbar.

7. After installation, the smart film edge should be sealed with neutral glass silicone, never acidity nor alkalinity.

Product Parameters

Application for Liquid Crystal Smart Film

Production of Privacy Smart Film

Check and Test Smart Glass Film Switchable

The accessories for installing Transparent Glass Film

Packing for PDLC Smart Film Electric Smart Glass