1000W Grid tied power inverter for solar panels and wind turbines
Your message must be between 20 to 2000 characters
Contact Now
Easy operation:connect your solar panel(DC10.5V to DC28V )to this grid tie inverter and plug the AC power to your home power socket.If your power system need the Wide Input Voltage,try to reference our Low frequency series.
In order to achieve higher power use requirements, the use of this product can be stacked, such as: 4 grid inverter 1KW of stack used is equal to 4KW.
Place of Origin: Guangdong China (Mainland)
Brand Name:YITAI
Model No:YTP-1000
FOB Price: Best Price
Port: Shenzhen,Guangzhou,Foshan
Minimum Order: 20 Set/Sets
Delivery Time: 3 working days
Packaging Detail: 4sets/CTN
Supply Ability: 50000 Set/Sets per Month
Payment Terms: T/T(Bank Transfer),Western Union,PayPal
We accept sample order or small trial order.
If you are interested please get back to me for futher discussion, thank u ! Above price only for your reference.
Need More Info?Feel free to contact with our customers service ,we will give u the reply within 24 hours!
Feature:
- Generates pure Sine Wave
- Automatic power adjustment
- Constant Power Output
- Low distortion output on all ranges
- Allow different Power factor from loads
- Compact and light weight design
- Maximum Power Point Tracking (MPPT) - optimize power output
- Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring
- Stackable (connect in parallel for higher output)
- Aluminum enclosure will act as heat sink to help dissipate heat
- Simple and safe installation
- Island protection: Inverter will shut down during black outs.
- Grid-Tied - sell green power directly back to the grid at a premium rate
(depends on your location)
Specification:
|
Grid-inverter Type |
YTP-1000 |
|
Recommended Maximum PV Power |
Ppv=1300Wp |
|
DC Maximum Input Power |
PDC.max=1100W |
|
DC Maximum Voltage |
VpvDC28VDC |
|
PV MPPT DC Voltage Range |
Vpv 10.5V~28DC |
|
Peak Inverter Efficiency |
ηmax>94% |
|
Power Factor |
0.93-0.99 |
|
PV Maximum Input Current |
Ipv.max65A |
|
Reverse Polarity Protection |
Fuse |
|
AC Rating Output Power |
950W AC |
|
AC Maximum Output Power |
1000W AC |
|
AC Normal Voltage Range |
80V-130;160~260VAC |
|
AC Frequency |
45-65Hz |
|
Inverter Output Current Total Harmonic Distortion |
THDIAC <5% |
|
Phaseshift |
<1% |
|
Island Effect Protection |
inverter shuts down during black out |
|
Output waveform |
Pure Sine Wave |
|
Inverter Output Shorting Protection |
Current Limiting |
|
Standby Power Consumption |
<8W |
|
Nighttime Power Consumption |
<1W |
|
Ambient Temperature Range |
-20 ~65 |
|
Cooling |
Convection cooled with fan |
|
Ambient Humidity |
0~100%(Indoor Type Design) |
|
Eelectromagnetic Compatibility |
EN50081.part1 EN50082.part1 |
|
Power Network Disturbance |
EN61000-3-2 |
|
Power Network Detection |
DIN VDE 126 |
|
Display |
1 Red and 1 Green LED |
|
Packing dimension(L*W*H) |
430x255x155mm |
|
gross weight (kg) |
3.5 |
Input and output
1.DC input
* Input voltage range: 10.5V to 28V.
* Solar Panel: recommend the use of power greater than 30W, the standard voltage 17.5V PV panels.
* Recommended, and even solar panels, thread will result in high input voltage inverter which exceeds the working voltage range.
* Wind turbine: Rated voltage 24VDC, maximum voltage 28VDC.
2.AC output:
* Output 220V AC power inverter can be used in voltage: 170V - 260V, 50 Hz
* Output 110V AC power inverter can be used in voltage range: 90V - 160V, 60 Hz
LED Indicator:
1.Red LED:
* Low-voltage protection (input DC voltage is less than 10.5VDC).
* Overvoltage protection (Input DC voltage is greater than 28.5VDC).
* Over-temperature protection (when the chassis temperature is above 75 ,
the temperature dropped about 2-10 minutes to restart automatically after cooling).
* Fault Protection (when 110VAC or 220VAC power outage or shutdown).
* Islanding protection: electricity disconnected, the inverter automatically shut down output.
2.Green LED:
* Green LED flashing: are adjusting power output, MPPT is working condition.
* Long bright green LED: Indicates the maximum inverter output power is in the locked state of work.
Notes
---Non-professionals do not disassemble, Only qualified personnel may repair this product.
---Please inverter installed in the low humidity and well-ventilated place to avoid the inverter
overheating, and clear around the inflammable and explosive materials.
---When using this product, avoid touching children, playing, to avoid electric shock.
---Recommended Maximum DC input 4AWG cable capable of handling more than 50A of the
cable size.
---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter
DC voltage drop caused by wear and tear.
---Connected to a power outlet to provide AC.
---Connected solar panels, battery or wind generators DC input DC power supply cable.
---Proposed wind power plant with its own charge controller and load dump.
Related Keywords
