Ultrathin Smart Magnetic Track Light 30W for commercial

How to install linear track lighting？

(1) Track light installation, generally to install the track, installed on the track of the lamp holder, fixed on the light holder, the light in the light holder, in the top of the track set two conductive pieces, the bottom of the track has a long strip groove.

(2) The top of the light holder is a top plate, it has a protruding two elastic terminals, the top plate of the light holder is pierced into the track, and the two elastic terminals of the top plate are respectively in contact with the conductive sheet in the channel.

(3) The light holder is directly embedded in the track, so that it can move horizontally, you can adjust the light projection position, and compared with traditional lighting, it has small size, less power consumption, luminous effect, easy to adjust, and mobile characteristics.

Precautions for track light installation：

(1)Load the light into the expected position of the track, pay attention to the compatibility of the track and the light connector, three-phase track, with three-phash connector; Single loop track with single loop adapter.

(2) When the track and adapter are installed, there is a certain directivity, the three-phase track has a groove, the adapter also has a convex block, and the installation should pay attention to the joint of the two, and be sure to align the interface.

(3) After installing the light, adjust the horizontal and vertical Angle of the light according to the position of the projection target to ensure that the light can fully and effectively project the illuminated object.