Anti-yellowing Epoxy resin for river table making 

Epoxy is a high-performance material with excellent resistance to corrosion, wear and high temperatures. As people's demand for epoxy resin furniture continues to increase, and as consumers become more aware of environmental protection, the environmental performance of epoxy resin furniture has received more and more attention. Epoxy resin furniture is not only beautiful and generous, but also easy to recycle and reuse, which meets the environmental protection needs of current consumers.

Product Name: Epoxy AB Glue
Ratio: A:B=2:1or 3:1 (weight ratio) 
form colorless transparent liquid hardness 
Shore :83~85D
Operating time 2-3 hours
Curing time initial curing 10 hours, full curing 14-16 hours
The amount of glue that can be poured at one time is 15-20kg, and the thickness is 5-10 cm thick, saving time and labor.
Product packaging 20 kg/group (A glue 15 kg, B glue 5 kg)

       We use high-quality materials, this is best selling type epoxy resin, it's resistant to yellowing,low viscosity, good fluidity, automatic defoaming during solidification, and the finished product is beautiful and shiny/glossy,highly transparent.

     We use high-quality raw materials, which are resistant to yellowing, and the finished product is more transparent

 and beautiful; self-defoaming, the product has low viscosity, good fluidity, automatic defoaming during solidification,

and the finished product is beautiful and shiny.

      Ultra-clear crystal glue characteristics
     1. Our this epoxy resin with good natural defoaming performance, temperature resistance, wear resistance, 

smooth and bright surface after hardening, good flatness, no ripples, and non-sticky hands. 2. Good transparency,

good gloss and adhesion. 3. High weather resistance after curing, and good performance under high and low 

temperature (0°C-80°C) conditions.

How to make epoxy resin river table:
1. Mix the resin and curing agent at a ratio of 3:1 and stir evenly. Remember to use an electronic scale. If the ratio is not accurate, the paint will not dry or even if it is dry, the hardness will not be enough. This is very important.
2. Add some blue color essence and mix evenly. Because I like to use color powder, the fluidity is very strong and the effect is very good.
3. Start pouring epoxy resin. Beginners should pay attention and remember not to pour it thickly at one time. Although epoxy resin can theoretically be poured 10cm at a time at 25 degrees Celsius (use vacuum equipment to defoaming). If there is no vacuum equipment, pour 2cm thick at a time. When the surface of each layer is almost dry, you can pour glue again. This way, the risk of multiple molding errors is lowest.
4. After it is finished, wait for it to dry out, and after it dries up, start to remove the formwork
5. Cut the edges and polish the surface smooth
6. After polishing, clean the surface and start to apply wax oil and wood wax oil. One purpose is to clearly show the texture of wood and resin, and the other is to protect the wood