Flat Proximity Sensor SL-J3MN1/J3MN2
-
$8.00≥1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
Your message must be between 20 to 2000 characters
Contact Now| Payment Type: | L/C,T/T |
|---|
Proximity Sensor SL-J3MN1/J3MN2
- The basic working principle of the proximity sensor is to send the light from the light source through the proximity into the modulator so that the parameters to be measured interact with the light entering the modulation area, resulting in changes in the optical properties of light (such as light intensity, wavelength, frequency, phase, polarization state, etc.), called the modulated signal light, and then use the influence exerted by the measured transmission characteristics of the light to complete the detection. This is principle of operation.
-
At present, the main products are: safety light curtain, photoelectric switch series, proximity switch series, optical fiber sensor series, ultrasonic sensor, intelligent sensor, displacement sensor, gas pressure sensor, etc. Look forward to your cooperation!
|
Model |
SL-J1R5□□ |
SL-J3M□□ |
SL-J5M□□ |
|
|
Maximum Sensing Distance |
1.5mm±10% |
3mm±10% |
5mm±10% |
|
|
Stable Sensing Distance |
0-1.2mm |
0-2.4mm |
0-4mm |
|
|
Standard Sensing Object |
Iron: 8*8*1mm |
Iron: 12*12*1mm |
Iron: 18*18*1mm |
|
|
Power Supply Voltage |
12 to 24V DC Pulse (p-p) 10% max |
|||
|
Current Consumption |
15mA max |
10mA max |
||
|
Control Output |
Open collector output 100mA max(DC 30V) |
|||
|
Differential Travel |
10% max of the Sensing distance |
|||
|
Differential Travel Frequency |
1kHz min |
600kHz min |
500kHz min |
|
|
Circuit Protection |
Reverse connection, surge absorption |
|||
|
Working Status Indicator |
Sensing indicator(Red LED) |
|||
|
Ambient Temperature |
Operating, Storage: -25 to +70℃(With no icing or condensation) |
|||
|
Ambient Humidity |
Operating, Storage: 35 to 95%RH(With no icing) |
|||
|
Residual Voltage |
1V max(Load: 200mA) |
1V max(Load: 50mA) |
||
|
Cable: 2m |
||||
|
Insulating Resistance |
50Ω max.(DC500V) Between current-carrying parts and case |
|||
|
Voltage Withstand |
AC 1000V 50/60Hz 1min Between current-carrying parts and case |
|||
|
Vibration |
Durable |
10 to 55Hz Complex amplitude 1.5mm each in X, Y, and Z directions 2h |
||
|
Shock |
Durable |
500m/s² each in X, Y, and Z directions 3 times |
||
|
Protective Structure |
IEC-IP67 |
|||
|
Material |
Case |
Heat resistance ABS |
||
|
Sensing Surface |
Heat resistance ABS |
|||
|
Quality |
Approx : 70g |
Approx : 80g |
||
|
Accessories |
Mounting bracket |
|||
Related Keywords
