Water purifier pressure sensor for detection

Product description

Water purifier pressure is not enough to do? 1. Check the filter. The filter element of the water purifier is the most important part. Many people use the incorrect way of the water purifier, which will cause the blockage of the filter element, resulting in the decrease of the pressure of the water purifier. Check that the filter is not clogged with dirt and impurities. If yes, replace the filter immediately. 2. Check the water pressure. The pressure of a water purifier is directly dependent on the water pressure, so you should check that the total water pressure in your home is within the pressure range required by the purifier. Specializing in the manufacture of water purifier pressure sensor. If the water pressure is insufficient, adjust the water supply pipe or install a water pump to increase the water pressure. 3. Check water pipes. The lining of pipes can also sometimes be covered with scale, which can block the flow of water and reduce the pressure on the purifier. Clean water pipes regularly to prevent water flow. 4. Adjust the water quantity of the water purifier. Sometimes the water flow of the purifier is too large or too small will affect the pressure of the purifier. Can adjust the flow of water purifier, improve the filter effect and pressure of water purifier. 5. Replace the water purifier components. After a period of time, some parts may lose their function or fail, such as filter element, water pipe, cleaning valve, etc., which will affect the pressure of water purifier. Check the components of the water purifier and replace the defective parts in time to ensure the normal operation of the water purifier. Specializing in the manufacture of water purifier pressure transmitter, refrigerant pressure sensor, common rail pressure transmitter, urea pressure sensor, etc.