PEEK PPS PEI Torlon Connector Socket

Connector socket have three parts: socket lid, socket and connector PCB.

Solder connector PCB on test PCB, then mount socket on connector PCB.

Pitch range from 0.30 to 1.27mm

Key material: PEI,Peek,Torlon,PPS.etc

Contact with top pogo pin

Socket Feature

Solder connector PCB on test PCB,then mount socket on connector PCB.

Connector PCB will be reballed, and size is same as that of chip.

No need to re-layout PCB, it is time and cost saving solution.

Wired out device test pad via connector PCB.

Socket Specification

Lid&house material:                              AL      

Insulation material:                               PPS,PEI,PeeK,Torlon

Contact material:                                  POGO pin(spring probe),silicone rubber

Contact length:                                     Min2.5mm,Max7.2mm

Contact rated current:                          Max 6.2A

Contact temperature rating:                 -40 - +120℃

Contact preload:                                  0.15mm,0.2mm,0.25mm(optional)

Contact force:                                     Min 6gf, Max 55gf

DC resistace:                                       Min 0.1ohm, Max100mohm

Life span:                                           Min 50k cycles, Max 100k cycles

Contact application pitch:                   Min 0.17mm

Contact material:                               top/bottomplunger: Becu/Au plated

                                                      barrel: Pd Alloy, Alloy/Au plated

                                                      spring: music wire/Au plated/ Stainless steel

Similar Connector PCB