Duratron® D7000 PI Polyimide Plastic Sheet Rod

Get Latest Price

Min. Order:: 1 Kilogram

Min. Order:: 1 Kilogram

Transportation:: Ocean, Land, Air, Express

Port:: Shenzhen, Guangzhou, Hongkong

Quantity:

Your message must be between 20 to 2000 characters

Contact Now

Basic Info

Supply Ability:	100
Payment Type:	T/T,Paypal
Incoterm:	FOB,CFR,CIF,EXW,DDU
Transportation:	Ocean,Land,Air,Express
Port:	Shenzhen,Guangzhou,Hongkong

Product Description

Duratron® D7000 PI hot compression molded shapes possess superior electrical and thermal insulation properties, and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these characteristics, Duratron® D7000 PI offers great chemical resistance, high strength and toughness, and outstanding dimensional stability. For these reasons, Duratron® D7000 PI is often seen as an ideal solution for insulators, high temperature fixtures, valve seats, gaskets, and seals. Duratron D7000 Pi Jpg

Material Properties

Excellent electrical and thermal insulation

Great chemical resistance

High strength, toughness, and dimensional stability at high temperatures

Candidate for metal replacement: Lightweight and lubrication free

Available Geometries

Duratron® D7000 PI stock shapes encompass a range of standard sizes in the following geometries: Rod, Plate, Tubular bar

Rod

Plate

Tubular bar

Available Colors

Duratron® D7000 PI stock shapes come in the following colors: Chestnut

Applications

Fixtures and handling parts for glass and plastics manufacturing

Hot Runner Nozzle Thermal Insulator Bushings

Metal replacement for Aerospace components - lightweight, lubrication free

Structural and wear parts for Semiconductor and Electronics manufacturing

Thermal Standoffs in Glass Manufacturing

Typical Properties of Duratron ® D 7000 PI Unfilled

PHYSICAL
Property	Test	Unit of Measure	Value
Density	ASTM D792	g/cm³	1.4
	ASTM D792	lb/in³	0.051
Water Absorption, 24 hrs, Immersion	ASTM D570	% by wt.	0.4
Water Absorption, Saturation, Immersion	ASTM D570	% by wt.	1.3
MECHANICAL
Property	Test	Unit of Measure	Value
Tensile Strength	ASTM D638	psi	16000
Tensile Modulus	ASTM D638	psi	583000
Tensile Elongation at Break	ASTM D638	%	4
Flexural Strength	ASTM D790	psi	20000
Flexural Modulus	ASTM D790	psi	600000
Compressive Strength	ASTM D695	psi	24000
Compressive Modulus	ASTM D695	psi	450000
Hardness	ASTM D785	NA	Rockwell M110
IZOD Impact-Notched	ASTM D256	ft-lb/in	1.4
Dynamic Coefficient of Friction	QTM 55007 (Dry vs Steel)	NA	0.23
Wear K Factor	QTM 55010	in³-min/ft-lbs-hr	50
Limiting PV	QTM 55007	psi-fpm	32500
THERMAL
Property	Test	Unit of Measure	Value
Coefficient of Linear Thermal Expansion	ASTM D696	x 10-5 in./in./℉	2.7
Heat Deflection Temp	ASTM D648	℃ at 264 psi	360
	ASTM D648	℉ at 264 psi	680
Max Continuous Operating Temp		℃ at 264 psi	304
		℉	580
Minimum Operating Temp		℃ at 264 psi	-195
		℉	-319
Thermal Conductivity	ASTM C117	BTU-in/ft²-hr-℉	1.53
Flammability Rating	UL94	NA	V-0
ELECTRICAL
Property	Test	Unit of Measure	Value
Dielectric Strength	ASTM D149	V/mil	700
Dielectric Constant at 1 MHz	ASTM D150	NA	3.41
Dissipation Factor at 1 MHz	ASTM D150	NA	0.0038
Surface Resistivity	ASTM D257	ohm/square	>10^13

Send your message to this supplier

* From:
* To:

Ms. Tina
* Messages:

Enter between 20 to 4,000 characters.

Related Keywords

Duratron PI High Temperature Polyimide Sheet Rod , Duratron D7000 Polyimide Unfilled , Duratron D7000 PI Machining Part