PEEK GF30 glass fiber sheet rod

Peek Glass Fiber Filled Sheet is composed of different chemical polymer compounds with some macromolecular main chains, so it is the most important variety of polyaryl ether ketone. It can be said that glass fiber reinforced peek has more outstanding performance. Among all its properties, the most prominent is heat resistance. In the continuous use of high continuity, the temperature can reach above 240 ℃, and it can reach above 300 ℃ after glass fiber reinforcement. In addition, it It also has other excellent properties, including electrical insulation properties and chemical corrosion resistance. It has the strongest water resistance and water vapor resistance, and has certain flame retardancy and radiation properties. This is a comprehensive performance. It still looks excellent.

The PEEK glass fiber reinforced material itself is composed of different infrastructures. It is a linear polymer compound containing a large number of benzene rings on different molecular bonds. Moreover, different substances constitute the rigid structure of the macromolecular chain. Various substances provide the honor of macromolecules. Therefore, the molecular chain of the entire peek plastic material presents some characteristics of both rigidity and flexibility. Relatively speaking, and Compared with polyphenylene ether, there are many things in glass fiber reinforced peek that cannot be replaced by other materials, because the flexibility of its macromolecular chain itself has certain characteristics and excellent performance, so it is Generally speaking, the molecular chain is very distinctive in the process of shooting. It has only a certain flexibility and can be cleaned. The cleanliness is as high as 48%. Generally speaking, its crystallinity also reaches 35%. The polarity in the molecular chain that enhances peek is still very large, and the force of each molecule is different, so its strength is also very high, which will directly lead to the whole mechanical performance being higher than that of polyphenylene ether, and electrical insulation performance. It is slightly lower than that of polyphenylene ether. Although glass fiber reinforced peek is said to exceed, the overall mechanical properties will decrease significantly, but because of the influence of crystallization, even if it is above 200 degrees Celsius, their mechanical properties can still show super good. characteristic

The glass fibre as a filler added to the Virgin PEEK makes Peek Natural Color Sheet highly resistant at higher temperatures, making it ideal for structural applications that need superior strength or stability at temperatures of about 300°F.  The glass filler lowers as well the PEEK material's expansion rate.

The more mature applications of HONYPLAS®PEEK include: piston ring, thrust ring, choke ring, valve disc, bacteria valve, star wheel, sealing ring, ball valve seat, bearing cage, oil-free lubrication bearing, magnetic pump of air compressor Isolation sleeves, electrodes, gears, screws, magnet wires, radiation shields, microwave digestion tanks, wafer carriers, etc.

HONYPLAS®Peek Plastic Sheet has been widely used in many fields such as petrochemical, electronic and electrical, instrumentation, machinery and automobiles, medical and health, aerospace, military nuclear energy, etc.

HONYPLAS®Peek Natural Color Sheet grade: 

1.HONYPLAS®PEEK Virgin : Brown-gray, made of pure polyether ether ketone resin as raw material, has good toughness and impact resistance among all PEEK grades. Pure PEEK can be sterilized using convenient sterilization methods (steam, dry heat, ethanol and Y-ray), and the raw material composition of PEEK complies with EU and US FDA regulations on food compliance, making it suitable for medical, pharmaceutical and food processing industry.

2.HONYPLAS®PEEK PTFE: Black, the result of adding PTFE, graphite and carbon fiber, makes it a bearing-grade plastic, its superior friction performance (low friction coefficient, wear resistance, higher peak pressure limit) .

3.HONYPLAS®PEEK 30GF: Brown-gray, the material is filled with 30% glass fiber reinforced plastic, which has better rigidity and creep resistance than pure PEEK, and better dimensional stability. It is the best choice for manufacturing structural parts. Can withstand a fixed load for a long time at high temperatures

4.HONYPLAS®PEEK 30CF: Black, this material is filled with 30% carbon fiber reinforcement, has better mechanical properties (higher elastic modulus, mechanical strength and creep) and more wear resistance than PEEK 30GF, and carbon fiber reinforced plastic is better than unreinforced plastic PEEK's plastic has 3.5 times the thermal conductivity to dissipate heat from the bearing surface faster

         HONYPLAS®PEEK Virgin                       HONYPLAS®PEEK PTFE                 HONYPLAS®PEEK 30GF               HONYPLAS®PEEK 30CF         

HONYPLAS®PEEK Product Technical Properties Data Sheet

HONYPLAS®PEEK Rod Size

HONY introduced imported PEEK profile extrusion production line to extrude 1250mm wide PEEK sheet to meet the demand of large-size PEEK parts in valve and other industries for ultra-wide PEEK sheet, better improve production efficiency and improve the quality of PEEK products. At the same time, the material utilization rate of the wide plate is very high when the typesetting cutting machine is processed.

HONYPLAS®PEEK Sheet Size