Green round OILON Oil filled nylon nylube ertalon

Cast Nylon 6 Oil-Filled offers self-lubricating properties for higher loads and slow moving parts. This grade also offers a lower coefficient of friction compared to all other Nylon 6 grades available.Oilon was first introduced into the market back in 1974. It was the very first authentic lubricated nylon having a blended liquid lubricant system built in during the process stages. This resulted in a substantial increase in bearing life more than 5 times that of natural cast nylon and more than 25 times that of phosphor bronze.

MC oil-impregnated and wear-resistant nylon is modified on the basis of MC nylon. It also has high crystallinity, molecular weight up to 100,000, 3-5 times higher than ordinary nylon 6, three times higher mechanical properties than ordinary nylon, good dimensional stability, low water absorption, high mechanical strength and hardness, and good heat resistance. Features. Fatigue resistance and electrical insulation properties are equivalent to corresponding nylon products.

MC PA6G Properties

• Better lubrication than MoS2
• Self lubricating
• High loaded and slow moving parts
• Reduced coefficient of friction up to 50%
• Better wear resistance

Cast Nylon Round Bar Cast Nylon 6 Oil-Fille Applications

• Chain guides
• Bearings
• Wear pads
• Cams
• Conveyor parts
• Gears
• Can mandrel

As an engineering plastic, MC oily and wear-resistant nylon has many advantages:

1. Its weight is only 1/7 of the manganese steel liner, which greatly reduces the weight of the inner cylinder. It reduces unnecessary strength and dynamics between components and reduces moment of inertia. It is also very convenient to assemble, disassemble and maintain.

2. When used in mechanical equipment, silos, hoppers and mixing barrels, reduce noise by 10-15 decibels. It can protect the physical and mental health of post workers.

3. Excellent mechanical properties MC oil-containing nylon crystallizes below its melting point and has a large molecular weight, so its mechanical strength is much higher than that of ordinary nylon 6 and nylon 66 products, especially with better creep resistance and fatigue resistance, so It can withstand heavy loads for a long time without deformation.

4. MC oil-containing nylon products with good resilience can prevent long-term deformation of the curved surface, keep it tough, and resist fracture caused by repeated impact loads. It is very necessary for products that withstand high impact loads.

5. MC oil-containing wear-resistant nylon has excellent wear resistance and self-lubricating properties, and can be used under general conditions of light load and low speed without adding lubricant. The characteristic of nylon is that after a certain period of use, the wear is reduced, and there is little wear and tear in the later period. In addition, the friction coefficient of MC oily and wear-resistant nylon is 0.3-0.4. In addition, due to the low self-lubrication and water absorption of MC oily nylon, it has self-cleaning properties that are difficult to combine with other materials.

6. Long service life Due to good wear resistance and low friction coefficient, the service life is 3-6 times longer than that of manganese steel liners.
Because MC oil-containing nylon has the above advantages, good high temperature resistance (easy to use for a long time below 150 degrees Celsius, and the high temperature service temperature is 200 degrees Celsius), and the characteristics of not bonding with other materials, it can be widely used in primary and secondary mixtures in the sintering industry barrels, distributors, mixing silos, fine powder silos and ore troughs.

Cast Nylon Round Bar Cast Nylon 6 Oil-Filled machined part

Nylon Bar Series