
high way radar synchronized traffic fog lights
- Payment Type:
- T/T, D/P, Paypal, Money Gram, Western Union
- Incoterm:
- EXW
- Delivery Time:
- 5 Days
- Transportation:
- Ocean, Land, Air
- Port:
- Shenzhen
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Place of Origin: | guangdong |
---|---|
Productivity: | 50000 |
Supply Ability: | stock |
Payment Type: | T/T,D/P,Paypal,Money Gram,Western Union |
Incoterm: | EXW |
Certificate: | CE/ROHS |
HS Code: | 8530800000 |
Transportation: | Ocean,Land,Air |
Port: | Shenzhen |
Product Description
Product Description
Introduction to the high way radar synchronized traffic fog lights:

The role of the high way radar synchronized traffic fog lights:
The radar-synchronized fog lights are placed in a large number of foggy areas and long downhill places. The penetrating yellow lights are mainly used to warn passing vehicles to slow down. Usually the yellow module flashes, when the fog lights are detected by the radar when a vehicle is passing by , The red module on the fog lamp will turn on for 1-10 seconds (settable), and then turn off to warn that there is a car in front of the vehicle behind, and pay attention to driving slowly. When the red module is on, the yellow module is not on or flashing; it can ensure safe driving of vehicles in foggy areas without being affected by the level of visibility, and can form linear navigation guidance in low visibility environments such as rain, fog, snow, and night. Greatly reduce the occurrence of highway traffic accidents and ensure the safety of people and property.

Instructions for debugging the lighting time of the high way radar synchronized traffic fog lights:
The left side of the digital tube of the radar synchronization fog lamp represents the red light on time setting (display number 1 represents the red light on for 1s, 2 represents the red light on for 2s...9 represents the red light on 9S, 0 represents the red light on for 10s ), the button on the left is the red light on time setting button, which can be set to light for 1-10 seconds. The right side of the digital tube represents the yellow light flashing frequency setting (display number 0 represents the yellow light flashing 30 times/minute, 1 represents the yellow light flashing 60 times/minute, 2 represents the yellow light flashing 120 times/minute), the right button is the yellow light flashing frequency Set button, only three flashing frequencies can be set. As shown in the figure below, the digital tube displays 21, which means that the red light is on for 2 seconds, and the yellow light flashes at 60 times per minute.

What are the characteristics of the high way radar synchronized traffic fog lights?
1. Mainly used in toll stations, expressways, etc. The LED uses Taiwan Epistar chip lamp beads, which are arranged in a direct-insertion manner. The number of LEDs are arranged closely, with super high brightness and good visual effects.
2. Usually the yellow module flashes. When the fog lamp detects a vehicle passing by through the radar, the red module on the fog lamp will turn on for 1-10 seconds (settable) and then go out to warn that there is a car in front of the vehicle behind.
3. The box body is made of cold-rolled plates and welded, which has good strength and wind resistance. It has good airtightness and dust resistance, and has good heat dissipation performance inside the screen. The fog lamp has complete components, reliable assembly, stable structure, smooth corner transition, no flash, no burr body;
4. The protective layer of the screen shell and connecting parts has uniform color, no scratches, no cracks, no matrix exposure and other defects, and its physical and chemical performance indicators meet the requirements of relevant national and industry standards;
5. The bottom is designed with outlet holes, which is not only convenient for outlet, but also has a good waterproof effect.
6. Completely waterproof: waterproof glue is applied to the connection between the wick and the box on the surface of the product to improve the waterproof performance of the product.
7. The synchronous fog lamp flashes at the same frequency, its warning effect will be stronger than the asynchronous effect, and it can play a better guiding role when used in a special environment.
8. Strict aging: The aging is verified 24 hours before the product is shipped, and the performance is more superior!

In addition to the high way radar synchronized traffic fog lights, We also produces other traffic product:
China Led Pedestrian Traffic Light
Led Pedestrian Traffic Light
Led Pedestrian Traffic Signal Light
Solar Led Traffic Warning Light
Led Traffic Warning Light
125mm Led Traffic Signal Light
Radar-synchronized fog lights are often used in highways and toll gates to warn drivers to pay attention to driving safety. Radar-synchronized fog lights are usually installed on both sides of the highway in the fog area. The highway has the characteristics of fast traffic and large traffic. Install fog lights at the road turns, bridges, tunnel entrances and exits, which play a certain role in improving road safety and reducing traffic accidents. At the same time, the fog lamp can effectively guide the operation of the vehicle in the case of rain and fog.

The role of the high way radar synchronized traffic fog lights:
The radar-synchronized fog lights are placed in a large number of foggy areas and long downhill places. The penetrating yellow lights are mainly used to warn passing vehicles to slow down. Usually the yellow module flashes, when the fog lights are detected by the radar when a vehicle is passing by , The red module on the fog lamp will turn on for 1-10 seconds (settable), and then turn off to warn that there is a car in front of the vehicle behind, and pay attention to driving slowly. When the red module is on, the yellow module is not on or flashing; it can ensure safe driving of vehicles in foggy areas without being affected by the level of visibility, and can form linear navigation guidance in low visibility environments such as rain, fog, snow, and night. Greatly reduce the occurrence of highway traffic accidents and ensure the safety of people and property.

Instructions for debugging the lighting time of the high way radar synchronized traffic fog lights:
The left side of the digital tube of the radar synchronization fog lamp represents the red light on time setting (display number 1 represents the red light on for 1s, 2 represents the red light on for 2s...9 represents the red light on 9S, 0 represents the red light on for 10s ), the button on the left is the red light on time setting button, which can be set to light for 1-10 seconds. The right side of the digital tube represents the yellow light flashing frequency setting (display number 0 represents the yellow light flashing 30 times/minute, 1 represents the yellow light flashing 60 times/minute, 2 represents the yellow light flashing 120 times/minute), the right button is the yellow light flashing frequency Set button, only three flashing frequencies can be set. As shown in the figure below, the digital tube displays 21, which means that the red light is on for 2 seconds, and the yellow light flashes at 60 times per minute.

What are the characteristics of the high way radar synchronized traffic fog lights?
1. Mainly used in toll stations, expressways, etc. The LED uses Taiwan Epistar chip lamp beads, which are arranged in a direct-insertion manner. The number of LEDs are arranged closely, with super high brightness and good visual effects.
2. Usually the yellow module flashes. When the fog lamp detects a vehicle passing by through the radar, the red module on the fog lamp will turn on for 1-10 seconds (settable) and then go out to warn that there is a car in front of the vehicle behind.
3. The box body is made of cold-rolled plates and welded, which has good strength and wind resistance. It has good airtightness and dust resistance, and has good heat dissipation performance inside the screen. The fog lamp has complete components, reliable assembly, stable structure, smooth corner transition, no flash, no burr body;
4. The protective layer of the screen shell and connecting parts has uniform color, no scratches, no cracks, no matrix exposure and other defects, and its physical and chemical performance indicators meet the requirements of relevant national and industry standards;
5. The bottom is designed with outlet holes, which is not only convenient for outlet, but also has a good waterproof effect.
6. Completely waterproof: waterproof glue is applied to the connection between the wick and the box on the surface of the product to improve the waterproof performance of the product.
7. The synchronous fog lamp flashes at the same frequency, its warning effect will be stronger than the asynchronous effect, and it can play a better guiding role when used in a special environment.
8. Strict aging: The aging is verified 24 hours before the product is shipped, and the performance is more superior!

In addition to the high way radar synchronized traffic fog lights, We also produces other traffic product:
China Led Pedestrian Traffic Light
Led Pedestrian Traffic Light
Led Pedestrian Traffic Signal Light
Solar Led Traffic Warning Light
Led Traffic Warning Light
125mm Led Traffic Signal Light
Related Keywords
Related Keywords