Industrial refrigeration air cooling chiller

Air-cooled chiller, air cooling chilling equipment, air cooling chiller machine, air chiller unit, air cooled chiller refrigeration equipment, box type air chiller unit, box type air cooling chiller machine, box type air cooling chilling equipment: is suitable for plastic injection molding. It can accurately control the temperature of the plastic forming mold to shorten the molding cycle and accelerate the product setting. The series uses the principle of cold and heat exchange for cooling, which can quickly cool down and stabilize the temperature control. And not affected by environmental factors.

Air-cooled chiller cooling configuration and advantages

1. Compressor

Panasonic has the advantages of small size, low noise, large energy, long life, easy operation, etc., reliable and stable high-efficiency quality.

2. Evaporator

The evaporator copper tube adopts internal and external thread type reinforced tube. The surface of the copper pipe is threaded, the outer surface of the copper pipe is smooth, and the cooling effect is good. The evaporator barrel is insulated with a 25 mm thick PE insulation board, without condensation, and the loss of cooling capacity is less and the transmission is fast.

3. Condenser

The copper tube is processed into a trapezoidal low-rib tube to enhance the heat transfer ability. The surface of the copper tube is smooth, the water pressure is reduced, and it is easy to clean and maintain.

4. Protection device

The protection system includes: compressor delay start protector, overload protector, high and low pressure protector, temperature control switch, antifreeze switch, fuse plug, electronic time protection safety valve, compressor overheat protector, compressor frequent start protector And abnormal indicator lights to ensure the normal operation of the unit.

5. Control system

High-intelligence PLC, PC-level computer control system, can be used for remote monitoring and control, with multiple functions such as automatic loading and unloading, timing switch machine and recording the cause of failure; simple operation, low failure rate, high safety factor, simple installation, system control can be Instant adjustment, intuitive and reliable.

6, frozen accessories

The frozen parts are selected SPORLAN (USA Poland), ALCO (USA Alcoa), DANFOSS (Danish Danfoss), etc., with excellent performance, safety and environmental protection.

7. Fan

Hangzhou Mart blower has more stable quality, long service life, low noise, high efficiency, rain and snow resistance, high temperature resistance, and its efficacy has not declined for more than ten years, greatly improving the thermal efficiency ratio.

NOTES:

1. Cooling capacity is based on the inlet and the outlet chilled water temperature 12℃/ 7℃, and the inlet and the outlet cooling water temperature 30℃/ 35℃.

2. Chilled water temperature range: 5℃ ~ 35 ℃; temperature difference between inlet and outlet chilled water: 3℃ ~ 8℃.

Item Main Components Brand/Origin

1 Compressor Panasonic/Japan

2 Evaporator TOYOCOOL/Shenzhen

3 Condenser TOYOCOOL/Shenzhen

4 Controller PUMP/Guangdong

5 Pump Minamoto/Taiwan

6 Fan Maer/Zhejiang

7 Accessories

(expansion valve, solenoid valve,liquid angle valve, pressure controller, etc.) Danfoss/USA

Emerson/USA

8 Dry filter ALCO/USA

9 High/low pressure gauge & controller JAVE/Taiwan

10 Electronic components Schneider/France

LS/Korea

Air cooled chiller,Air cooling chiller,Air cooled chiller york,Air cooled chiller carrier,air cooling chiller system,air cooled chiller kw/ton,air cooled liquid chiller,how air cooled chiller works