Acrich2 Ac Led Modules dc 12v Magnet installation

Acrich2 Ac Led Modules dc 12v Waterproof LED product introduction

An electrical device that changes the luminous flux of a light source in a lighting device and adjusts the level of illumination. The purpose of the dimmer is to adjust the brightness of the light. Acrich2 Ac Led Modules dc 12v Magnet installation adopts SMD2835 LED AC linear process, white light (WW) 5000K-6500K, input voltage: AC220-240V, magnet installation, led ac module round 24w net weight 137g, lumens:2473lm, CCT: 27000K/3000K/4000K/5000K/6000K,LED lighting module specifications are 5W, 9W, 15W, 24W, 35W For industrial lighting, indoor home lighting, bedroom lights, living room lights, kitchen lights, balcony lights, dining lights.

Acrich2 Ac Led Modules 24w Magnet installation video

Acrich2 Ac Led Modules dc 12v round 24W Specifications:

Wrking voltage: AC220-240V 50HZ

Module power : 24W

Luminous flux: 2538lm,

Light color: white light

size: Rectangle round 210mm*1.2MM

No ultraviolet , electromagnetic wave radiation.

CCT: 27000K/3000K/4000K/5000K/6000K

LED light source has red, green, blue, yellow, white, warm white, three primary colors can be customized according to customer color requirements.

Waterproof: No

SMD type:  LED SMD 6060

color rendering index is more than 80.

Acrich2 Ac Led Modules dc 12v Magnet installation:

1.High homogeneity thanks to small LED pitch LED.

2.High voltage (HV) for non-isolated, low voltage (LV) for SELV operation.

3.No need to drive, wiring can be, 3 years replacement, full light, no flash screen.

CE RoHS certified Ac Led Modules 24W Downlight

Energy saving: The energy consumption of white LEDs is only 1/10 of that of incandescent lamps and 1/4 of energy-saving lamps.

Ac Led Modules 24W Downlight

Acrich2 Ac Led Modules 24W for linear and square luminaires

Acrich2 Ac Led Modules dc 12v 24W bottom view product power-on luminous diagram

The humanized illuminance difference design helps to concentrate and improve efficiency.

Acrich2 Ac Led Modules dc 12v Magnet installation bottom view

led ceiling light pcb board replacement:

1. Clean the installation surface, evenly apply the heat-conducting silicone grease to the bottom of the LED module, and fix the LED module and radiator with screws. 

2. Attach the lens and screw it in place. 

3. Ac 220V power supply is introduced for power test. 

4. It is recommended to use an insulating gasket at the bottom of the screw.

our team

Isource lighting Co., Ltd is a professional company that globally operates LED lighting product models. 

All of our products are qualified with UL, cULs, ETL, cETL, Energy Star, DLC, CE, ROHS, SAA certificates.

Isource lighting Co., Ltd Illuminate you and me, Brighten the Light, walk together.

best led module strip lighting. light the world