OEM Custom CNC Service Machining Parts

   In CNC machining, milling surface parts inside and outside the contour and milling surface commonly used flat end milling cutter, the tool parameters of the empirical data are as follows: first, the radius of the milling cutter RD should be less than the part inside the contour surface of the minimum radius of curvature Rmin, generally take RD=(0.8-0.9) Rmin.Second, the processing height of the parts H< (1/4-1/6) RD, to ensure that the knife has enough rigidity.Three is to use a flat end milling cutter to cut the bottom of the groove, because the bottom of the groove two times need to be overlapped, and the tool bottom edge of the radius Re= r-r, that is, the diameter of d=2Re=2(r-r), programming to take the tool radius is Re=0.95 (Rr).For some vertical shape surface and variable bevel contour processing, commonly used spherical milling cutter, ring milling cutter, drum milling cutter, taper milling cutter and disk milling cutter.

   We are a custom factory,Main business scope is CNC Turning Machining ,CNC Milling Machining,CNC Machining Parts,Plastic Parts,Sheet Metal,Die Casting and so on.

If you are interested in our Aluminum Cnc Turning Machining, please feel free to contact me. Any enquiries that you make will get a prompt response.

Products Information:

Material:  Aluminum

Surface treatment: Anodizing

Production processing: Aluminum Cnc Milling Machining

Product usage: Fixtures and some other equipments

Tolerance: +-0.01mm

Products images:

If you are interested in any of our products, contact us to talk about the details: