MOLEX 4.20mm 180°Male With Post Wafer Connector

1.product introduction

The Wire To Board Connectors between the circuit board is different, and its type is different, and each type has its own characteristics.Some Wire To Board Connectors are used in compact products and are denser than row pins.Application scenario: Widely used, conventional intelligent hardware products are basically used.Advantages: small size, large number of needles, 1 centimeter length can do 40 needles (the same size can only do 20 needles).Disadvantages: The structural design needs to be fixed and is expensive and cannot be plugged and unplugged frequently.Wire To Board Connectors are widely used in various electronic equipment and communication systems, such as computers, mobile devices, network equipment, industrial control systems, etc.

2.product parameter

 SPECIFICATIONS
·Voltage rating：600V AC.DC
·Current rating：7A,AC,DC
·Withstanding Voltage：1500V AC/minute
·Insulation resistance:1000MΩ min
·Temperature range：-25℃-+85℃
·Contact resistance：20mΩ max 

WAFER
·Part NO：AW4201VT-2xNP-XXXX
·Poles:02-24P
·Housing Material：PA66 UL94V-2 or UL94V-0
·Pin Material:Phosphor Bronze
·Contact Area：Matts Tin or Gold Plating Thckness Min
·Soldering Area:Matts Tin 100U" Plating Thckness Min
·The Dimension Marked“  ”Must Be Recorded

3.product picture