Addition Type and Double Components Liquid Silicone

Products Features: ADL-800 series are the materials liquid-solid coexist type,with the appearance of natural transparent and show tremelloid shape.Its characterics are as below: 1.High-low temperature resistance,used in wide-range temperature(-50~200) 2.The activator is Platinum and Chrome Compound with innocuity and inoffensive. 3.Good fluid, it can be poured into minor details(such as IC micromodule) 4.Mould easily 5.Change freely from rubber to liquid. 6.Excellent in electrical performance and weather resistance. Typical application: It can be made into falsies, shoulder,padding and insole and so on. Usage: Mix up A and B evenly according to ratio, vacuum defoamated,and then mould by injecting or pouring.mould temperature is 80-150 degree,time is 8-60mins. Notice: 1. Mix with A and B component equably and fully before using; 2. The sealed and mixed should be used up during safty time,otherwise,it will slowly cured,causing waste. 3. It has the connection for curing time and termperature of the material, the lower for the temperature,the longer for its curing time. 4. It is non-dangerous goods.But pls donot have it touch mouth or eyes .If it happens,pls wash quickiy with a lot of rinsing.