strong polished surface zirconia ceramic block brick

strong polished surface zirconia ceramic block brick

Reputation depends on quality,  quality comes from Hard!

Zirocnia Ceramics:

Main points of grouting operation process (1) When grouting, the mud on the model should be wiped off, and the speed of feeding should not be too fast, so that the air in the model can be discharged with the injection of mud, avoiding air mixing into the mud, and avoiding (2) When casting large products, in areas with large shrinkage such as edges and corners, before the grouting, the silk cloth can be attached to the corresponding parts in the model to make the movement speed of each part as balanced as possible to prevent Cracking. (3) For products that need to be formed by core, pre-spray the powder on the core to help demould. (4) Master the length of time to ensure the thickness of the blank. (5) Before slurrying Open the gas eye, the speed should not be too fast, so as to avoid negative pressure in the model, so that the blank body will leave the model too early to cause deformation or collapse. (6) When repairing the viscosity, the blank of the part should be slightly lower than the moisture content of the main body. %~3%. Ceramic injection molding die manufacturing process 1 Mold manufacturing process Sanitary ceramic mold manufacturing is a complicated and meticulous work, which requires superb skills. In order to make a working mold for grouting, it is necessary to go through A series of close work. The general manufacturing process can be divided into the following five steps: Step 1: Make a prototype prototype Inch consistent with the sanitary ceramics products. System is made based on the design drawings (or sample). Ruoyi have physical samples need to be generic, the first step may be omitted.

Data Sheet↓

Compressive Strength(20°C): 2000Mpa

Modulus of Elasticity(20°C): ＞200Gpa

Application industry:

Machinery, fiber optic, knife, medical, food, petroleum etc.

Specific application:

plunger, ceramic shaft, fiber optic bushing, stub, grinding, ceramic knife, ceramic slide guide, machined plunger, mobile phone shell, watch case, haircut razor blade etc.

7.MOQ is not limited, small quantity is welcome.

8.Vigorous team and good after-sales service

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory.
 
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
 
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.