24 Ports Managed Power Over Ethernet Switch

N-net 24 Ports Managed Power Over Ethernet Switch

NT-29M24T4GC poe switch, which is a layer 2 switch that with management and poe function. From this L2 managed switch, you will find the poe ports at your first sight--sorrounding with yellow label. N-net 24 ports managed fast Ethernet POE switch enables a large-scale monitoring network for your whole devices to  terminal with a internal chipset. As a 10/100M poe switch, this stackable  managed fast Ethernet POE switch also can be a ideal solution for home and medium-sized business.

Managed Switch Features

1. 24x 10/100Mbps downlink PoE Ethernet Ports, 2x 10/100/1000Mbps uplink Ethernet Ports and 2x1000Mbps uplink SFP Ports ,or 4x 1000M Gigabit Ethernet COMBO ports
2. IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3z, IEEE802.3af/at standard
3. 10/100Mbps auto-negotiation and auto MDI/MDI-X, compatible with various Ethernet devices
4. Support L2+ Switching features including 802.1Q VLAN, Port Mirroring, Port isolation, IGMP Snooping,
5. DHCP Snooping, DHCP Relay , LACP, IP Source Guard, ARP inspection, ACLs etc.
6. Store-and-forward mechanism is employed to avoid packet loss and error frames
7. Support spanning tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1S)
8. Support IP/Port/Mac binding.
9. Jumbo frames support a maximum of 9.6K kilobtyes
10. Support enhanced management through WEB, CLI, SSH, SNMP.
11. Built-in 1U rack power supply series, easy installation

PoE Switch For Ip Camera Application

Managed PoE Switch 10/100M Instruction:

1. Front board have 32 ports, Provide 24x 10/100Mbps downlink Ethernet Ports, 2x 10/100/1000Mbps uplink Ethernet Ports or 2x 1000Mbps uplink SFP Ports; or 4x 1000M Gigabit Ethernet COMBO ports

2. LED Indicator State:

Power:   1 green light indicates that the power normal work;

Ethernet: 28 green lights indicate that the Ethernet Link and Act

Ethernet: 28 green lights indicate that the Ethernet speed.

Installation step

Please check below device and accessories before installation, if there are missing, please contact with your supplier.

1. Switch                             1PCS

2. User Manual                        1PCS

◆ Please turn off the signal source and the device's power before installing, installation with power on may damage the device;

◆ Use network cable to connect Ethernet switch`s UPLINK port with NVR or Other Device;

◆ Connect Ethernet switch with power adapter;

◆ Check if the installation is correct and device is good, make sure all the connection is reliable and power for the system;

◆ Make sure every network device has power supply and work normally.

10/100M 24 Ports PoE Switch Information