Wall-Mounted Angle Valve for G1/2 Inch Tubes

Angle Globe Valve

Suitable for connecting interface for G1/2 inch tubes. Angle Valves slow-open switch. High purity brass main body, resistance costing,single hole wall-mounted installation.Ceramic cartridge,Quality guarantee time:5 years no leakage.

Specification:

Product Name: Angle valve HN-803

Material: Brass

Surface finished: Polished Chrome color

Connection size: G1/2 inch

Valve type: One in one out

Installation: wall mounted

Easy to install and clean.

Weight: 165g

Package included:

1 x Angle valve

1 x Decorative cover

Service conditions:
1)The working pressure of the product is 0.05MPa-0.9MPa

2)The temperature is no more than 85° when supply hot water.

3)Don't use vapor when supply hot water.
4)The working temperature is more than 0°

Remark:

With stainless steel escutcheon, personality can be defined blue and red (hot and cold water) identification with plastic button.

Attention:

1. Before installing, you must clean up the water supply pipe and check the thread specification of the pipe to ensure it can match the Brass Angle Valve.

2. When installing the joints, the pipe thread should be wrapped with the appropriate raw material to ensure the reliability of sealing.

3. Adjust the direction of the water outlet to make Angle Seat Valve in the right place.

4. Please take effective heating measures to your home water equipment when environmental temperature is less than 0℃.

5. Please set up drainage facilities to avoid water leaking.

6. Please check the Brass Check Valve is solid or not after you have installed, then turn on the switch and check the connected of the water mains to ensure whether leak or not.