Silver Chrome Color Brass Angle Valve 1/2 Inch

Angle valves uses to connect to the taps, toilet, water heaters and other hot and cold water pipes. It can adjust the size of water pressure, and control waterway when overhaul. This Angle Globe Valve made of H59 brass integrally cast, high – quality ceramic valve core, chrome surface finish. Versatile outlet to facilitate family needs. You do not have to worry any problem about water leakage.

Specification:

Product Name: Brass Angle Valve 1/2 Inch

Model No.: HN-820B

Surface finished: Polished Chrome color

Material: Brass

Connection size: G1/2 inch

Valve type: One in one out

Installation: wall mounted

Easy to install and clean.

Weight: 148g

Package included:

1 x Brass Check Valve

1 x Decorative cover

Application: Bathroom basin faucets, toilet, water heater, kitchen faucets.

Service conditions:
1) The working pressure of the product is 0.05MPa-0.9MPa
2) The working temperature is more than 0°

3) Don't use vapor when supply hot water.
4) The temperature is no more than 85° when supply hot water.

Note:

1. Before installing, you must clean up the water supply pipe and check the thread specification of the pipe to ensure it can match the angle valve.

2. When installing the joints, the pipe thread should be wrapped with the appropriate raw material to ensure the reliability of sealing.

3. Adjust the direction of the water outlet to make angle valve in the right place.

4. Please take effective heating measures to your home water equipment when environmental temperature is less than 0℃.

5. Please set up drainage facilities to avoid water leaking.

6. Please check the Angle Seat Valve is solid or not after you have installed, then turn on the switch and check the connected of the water mains to ensure whether leak or not.