Manufacturers Custom 3535 Ceramic Lamp Beads

                                                     Manufacturers Custom 3535 Ceramic Lamp Beads

We craft it with more attention to detail. Every detail is meticulously polished from the inside out. Energy-saving chip, stable output, high light efficiency, low light decay. Using high-performance wire, fast heat dissipation, good conductivity, good stability and high temperature resistance. High-quality bracket, good thermal conductivity, not easy to oxidize. The use of environmentally friendly colloids can withstand high temperatures.

• Features

       * Emitted Color: UVC 

        * Lens Appearance: Clean quartz lens

        * Dimensions:3.5*3.5mm 
        * Power:25-30mW 
        * Optical Angle:60 degree
        * Current:150mA 
        * Voltage:6.5V 
        * Wavelengths: 270-280nm 

• Applications

        1.Sterilize

• Soldering:

        1. Manual Soldering

        The temperature of the iron tip should not be higher than 350℃and Soldering time to be within 3 seconds per

        solder-pad.

        2. Reflow Soldering

        Preheating : 140℃~160℃±5℃,within 2 minutes.

        Operation heating : 260℃(Max.) within 10 seconds.(Max)

        Gradual Cooling (Avoid quenching)

• Storage

        In order to avoid the absorption of moisture, it is recommended to solder BINGRI LEDs as soon as possible after

        unpacking the sealed envelope.

        If the envelope is still packed, to store it in the environment as following:

          (1)Temperature : 5℃-30℃(41℉)Humidity : RH 60﹪Max.

          (2)After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, or equivalent

              soldering process must be:

              a. Completed within 168 hours.

              b. Stored at less than 30% RH.

        (3)Devices require baking before mounting, if:

             (2) a or (2) b is not met.

        (4)If baking is required, devices must be baked under below conditions:

               48 hours at 60℃±3℃

• Tapping and packaging specifications (Units: mm)

* Widely used in surface sterilization,air sterilization,water sterilization,and has a high usage rate in biomedicine.