SK6812 LED Lights

Built-in IC Symphony light bar 5V full-color light with a single white horse running lights with hotel decoration light toys use built-in point control lamp beads XT1511 JERCIO made
5 meters / piece, 4 meters / piece, 3 meters / piece, 2 meters / piece, 1 meter / length of the optional, large size can also be customized other length, please note clearly!
 
 
Symphony of soft light Product Description:
Full-color built-in driver IC soft light bar, using the world's most advanced integrated lamp beads WS2812 drive control light source, each lamp 60 beads, each lamp beads for a single pixel, each pixel are 256 gray Degree level and is a separate section, you can separate the connection.
 
  Symphony of soft light Product Features:
Full color soft light bar one meter60 paragraph60 lamp casing waterproof soft light strip with silicone casing will be completely covered by the surface of the light, every 5 meters for a plate, each end of the three-and three-color plug on the two plus two Color power cord
1. Each lamp bead is a pixel,
2. Each pixel can be individually controlled
3. Each individually controlled pixel can achieve 256 X 256 X 256 color variations
4. Each pixel is a separate first paragraph, can be arbitrarily cut or welded
5. Light surface with silicone 360 degrees in all directions completely enclosed, effective anti-rain, anti-dust, anti-damage
 
   Symphony of soft light Product advantages:
1. This light bar for the full-color light, colorful and diverse vitality can be arbitrarily change a variety of effects; relative to the traditional monochrome static light bar, our light can be light in the king level
2. We all know that full-color light bar needs a driver IC with a light bulb, and then through the controller to control the driver IC to achieve the effect of control lamp beads to achieve full color changes, but said dozens of words, the actual application But need a lot of electronic components to meet, we all know that soft light is soft board, the more electronic components above, the higher the failure rate will be higher, the greater the risk will be used; and our Built-in driver IC light bar, directly with the driver IC and lamp beads together directly through the controller control lamp beads can achieve a variety of full-color conversion effect, the middle omitted a variety of electronic components, not only reduces the cost, more Reducing the failure rate of the product greatly enhance the stability of the product;
3. Relative to other light bars. Our light bar is more concise, fewer electronic components, lower failure rate
4. The traditional light bar on the use of the lamp beads, the customer can not determine the source of light beads, can not guarantee the quality of light beads, most businesses use some secondary products by secondary packaging to use and reduce costs; and our built-in IC lamp beads, only Is built-in IC lamp beads, can only be the kind of high-priced high-quality built-in IC lamp beads
5. Silicone sleeve with soft, transparent anti-aging and other advantages. So set the surface of the light can not only protect the light can also play the advantages of casing itself
6. Light bulb casing after the clean and beautiful light transmission rate
 
   Symphony of light light of the product composition:
Full-color light bar one meter 30 section 30 lights = drive IC + lamp beads + capacitor + FPC line soft board (white board, blackboard optional) + silicone sleeve + plug three connector + power supply two connectors every 5 meters An electrostatic bag is packed
 
  Symphony soft light bar size parameters:
1. The number of lamp beads: 74/ m
2. Number of drives: 74 / m
3. Number of segments: 74 / m
4.FPC board width: 10MM
5. Working voltage: 5V
6. Power: 0.3W / stars 9W / m 45W / disk
7. Pressure drop distance: 5-10 meters
8. Casing material: silicone
   
   Symphony of soft light bar Product selling points:
1. A lamp bead is a pixel, one meter has 74 pixels
2. Each pixel is 256 grayscale
3.FPC circuit board is simple and easy to fail
4. All-round protection with silicone casing
5. Both ends of the humanized connector, better and more convenient to use
4. The luminous brightness of the product is the highest with the same lamp beads
Luminous color
Main wavelength (nm)
Luminous intensity (mcd)
Operating current (mA)
Operating voltage (V)
Red light
620-630
550-700
20
1.8-2.2
Green light
515-530
1100-1400
20
3.0-3.2
Blue light
465-475
200-400
20
3.2-3.4
 
   Symphony soft light strip Scope:
1. counter 2. jewelry display 3. wall 4. fish tank 5. advertising signs 6. night market 8. facade and other urban lighting decoration use of the surface are very wide, because the store is limited, can not enumerate
 
  Symphony soft light strip installation:
Power + controller + light bar
1. First look for the direction: Each section of the light bar has some small arrows, arrows for the direction of the output, said the signal forward; arrow tail direction for the input, the direction of our link signal wiring;
2. The input of each roll of light (that is, the top of the arrow on the light bar) has a three-color (red and green) pair of plugs with a two-color (red and white)
Three-color connector (red and green white) then the controller:
                      Red - positive pole vacant (or 5V power positive)
                      Green - signal connected to the controller above the output port is usually: DATA
                      White - ground connection to the controller above the ground (that is, 5V negative) is usually: GND or COM
Two-color connector (red and white) then power supply:
                      The positive pole of the red-positive 5V power transformer is usually: + V
                      White-negative 5V power transformer The negative terminal above is usually: -V or COM