LED Lights-30 segments 30 lights

Shenzhen Jercio Technology Co., Ltd
 
30 paragraph 30 lights Symphony sk6812 light bar Features:
Full color soft light bar one meter 30 30 light is not waterproof, soft light on the back of the use of 3M ultra-adhesive double-sided adhesive, every 5 meters for a plate, each end of the three-and three-color plug connector plus two-color power
1. Each lamp bead is a pixel,
2. Each pixel can be single point single control
3. Each individually controlled pixel can achieve 256 gray levels
4. Each pixel is a separate first paragraph, you can arbitrarily cut
 
product composition:
Full-color light bar one meter 30 section 30 lights = drive IC + lamp beads + capacitor + FPC line soft board (white board, blackboard optional) + on the plug and three connectors + power supply two connectors every 5 meters for a static bag package
 
Size parameters:
1. The number of lamp beads: 30 / m
2. Number of drives: 30 / m
3. Number of segments: 30 / m
4.FPC board width: 10MM
5. Working voltage: 5V
6. Power: 0.3W / stars 9W / m 45W / disk
7. Pressure drop distance: 5-10 meters
   
Product selling point:
1. A lamp bead is a pixel, one meter has 30 pixels
2. Each pixel is 256 grayscale
3.FPC circuit board is simple and easy to fail
4. All-round protection with silicone casing
5. Both ends of the humanized connector, better and more convenient to use
6. Product luminous brightness super-use the same lamp with the highest
Luminous color
Main wavelength (nm)
Luminous intensity (mcd)
Operating current (mA)
Operating voltage (V)
Red light
620-630
550-700
20
1.8-2.2
Green light
515-530
1100-1400
20
3.0-3.2
Blue light
465-475
200-400
20
3.2-3.4
 
Scope of application:
1, hotel / nightclub / KTV and other places of the polygonal walls, water droplets row of smallpox, from decorative atmosphere;
2, buildings, advertising walls, signs, festivals and other decorative areas of the city from the United States / lighting effect;
3, home decoration lighting (stairs, door frames, bar, wine cabinet, wardrobe, TV cabinet, DIY home decoration ...);
4, car beauty (body, car bottom ...);
5, with a landmark building buildings pavilions, bridges, parks and other outline of the outline, from the embellishment of lighting effect.
6, lighting signals (such as a variety of light-emitting instructions)
7, Edge-Lighting transparent or diffused material
8, support in underwater lighting works
9, canopy and bridge arched edge / amusement park / theater / aircraft cockpit lighting
 
Installation:
Power + controller + light bar
1. First look for the direction: Each section of the light bar has some small arrows, arrows for the direction of the output, said the signal forward; arrow tail direction for the input, the direction of our link signal wiring;
2. The input of each roll of light (that is, the top of the arrow on the light bar) has a three-color (red and green) pair of plugs with a two-color (red and white)
Three-color connector (red and green white) then the controller:
                      Red - positive pole vacant (or 5V power positive)
                      Green - signal connected to the controller above the output port is usually: DATA
                      White - ground connection to the controller above the ground (that is, 5V negative) is usually: GND or COM
Two-color connector (red and white) then power supply:
                      The positive pole of the red-positive 5V power transformer is usually: + V
                      White-negative 5V power transformer The negative terminal above is usually: -V or COM