42% Carbon Black High Jetness Black Masterbatch

Description of 42% Carbon Balck Masterbatch 9014A

The 42% Carbon Black Black Masterbatch 9014A is one grade higher than 9014, the same ingredients, but better dispersion and finishes middle grade concentration black masterbatch,  made of  virgin PE carrier and  high tint power pigment carbon black (ZY-1) and super fine CaCO3,  polished  by PE wax, have shiny surface and finish, the MFI is as high 17-18 gram/10 mintues 21.6kg &190 Cdegree. The 42% Carbon Black Masterbatch  does not have any odor smell, compatiable with ABS, PC, PS, Nylon, PPM, PPS all engineering materials.. The 42% Carbon Black black masterbatch 9014A is one general using black masterbatch, and  could be directly used for most thermal plastic hard resin production. The 42% Carbon Black Black Masterbatch is suitable for use in common injection, granulation, pressure sheet,extrution pipe. 

Formulations

Carbon Black Content=42%±1%
Carrier=Virgin LDPE

Carbon Black =high tint power pigment carbon black(ZY-1) 

Calcium Carbonate= 1200mesh

Compatiable Applications
The 42% Carbon Black Black Mastebatch 9014A is compatible with ABS, PC, PS, Nylon, PPM, PPS. materials.

Method of Usage
The 42% Carbon Black Black Masterbatch 9014A has good dispersion ability and  is therefore suitable for direct addition and mixing with plastic resins in mixer,avoiding pollution and mal-scattering problems caused by pigment.

Recommended Dosage
1-3% subjected to the final products requirements.

Physical Properties
Density(24℃)      :  1,320kg/m3
Melting Flow Index  : 18g/10min(21.6kg/190℃)     
Moisture Content   : <0.15%

Packaging And Storage
The 42% Carbon Black Black Masterbatch 9014A  is supplied in pellet form and packed in 25kg plastic or paper bags.It should be stored in a dry place.

ANAD MASTERBATCH-- COUMPOUNDING YOUR SUCCESS!