High Quality In-trunk Auto Jump Starter & Tire Air-pumping Device

High quality multi-USB emergency Li-ion In-trunk Auto Jump Starter & Tire Air-pumping Device

Product Parameters In-trunk Auto Jump Starter & Tire Air-pumping Device
Battery: High rate power polymer battery cell 
Capacity: 22000mAh
Input: charging at home 14.8V/1.0A
             Charging in car: 12.6V/1A
Output: Mobile phones/tablets/other digital products: 5.0V/1.0-2.1A 
                Laptops: 20.0V/3A: 20.0V/3A
                 On-board equipment: 12.0V/2.5A
              Automobile startup: 12.0V/200-400A
Charging time: 4-6 hours 
Starting current: 200A
Peak current: 400A
Working temperature: 0-60 C
Product dimension: 234X164X128mm

Precautions: In-trunk Auto Jump Starter & Tire Air-pumping Device
1. Before start, ensure red and black clamp are firmly clamped and there is sufficient safety distance between red and black clamp to avoid the falling off or collision of red and black clamp caused by engine vibration after the starting of the automobile. 
2. It is prohibited to directly clamp red and black clamp, otherwise, safety accident might be incurred. 
3. After the automobile is started, please evacuate personnel to be away from engine compartment in order to prevent the personal harm caused by engine running. 
4. Take off main engine within 30 seconds after the start of the automobile, otherwise, this product might be damaged or even safety accident can be incurred. 
5. In case it is started for many times, please check the residual battery level before each time of start. 
6. People (especially children) not familiar with this product are prohibited to use this function. 

Automobile storage battery 
Red clamp 
Black clamp 

Tire Pumping Function In-trunk Auto Jump Starter & Tire Air-pumping Device
Pump Working Voltage: 12 V
Electric Current: ≦7A
Power: ≦90w
Working Pressure: 10 kg/c㎡
Air Displacement: 15 L/M
Air Pumping Time: 7 Minutes to 2.5kg/c㎡ tire pressure for 195/50 R16 Tire


Other functional application In-trunk Auto Jump Starter & Tire Air-pumping Device
Rescue signal light and flashlight 
1. In case the vehicle is stopped due to fault or rescue is required, you can use the flashlight or rescue signal light function of this product. 
2. Make long pressing of on/off button to enter to function mode and then switch among four different kinds of mode through each time of press; LED flashlight/SOS (three long and three short)/burst flashing (LED)/ rescue signal light (white color)


LED flashlight
SOS (three long and three short)
Rescue signal light (white color)
Burst flashing (LED)

Charging of mobile phones (tablet PCs/other digital products)  In-trunk Auto Jump Starter & Tire Air-pumping Device
1. The original USB charging cable of this product has its own Micro USB interface, but you can also directly use your mobile phone (digital) USB charging cable. This product supports all USB charging digital devices.
2. After the charging cable is well connected, lightly press key/on button to enter to charging state; after the charging cable is disconnected, this product will be automatically switched off. 


Charging of laptops In-trunk Auto Jump Starter & Tire Air-pumping Device
1. This product provides original laptop charging cable, please select the adapter matching your laptop. 
2. After the charging cable is well connected, lightly press key/on button to enter to charging state; after the charging cable is disconnected, this product will be automatically switched off.


Laptops/imaging equipment  In-trunk Auto Jump Starter & Tire Air-pumping Device
1. This machine is applicable to 12V/2A power supply of imaging equipment, such as cameras and other digital devices. 
2. After the charging cable is well connected, lightly press key/on button to enter to charging state; after the charging cable is disconnected, this product will be automatically switched off. 

Packing accessories 
1. Adapter 
2. Ignition clip
3. Car charger 
4. Air pump wire 
5. USB cable 
6. Instructions 

Warranty Card
Be properly kept by customers 

Production date:-----------------.
Selling date:---------------------
File No.: --------------------.
Seller/Official Seal: 

Warranty stipulations
1. From the date of purchase, there is one year warranty for the whole product. 
2. In case this product has any fault under normal use within warranty period, the user could go to the authorized repair place of our company to repair with this warranty card.
3. In case any of the following circumstances occurs within warranty period, there shall be no free repair service.
1) Where any abnormal operation, fault or damage is incurred as the user fails to use according to the requirements in the instructions; any fault or damage caused by the repair by oneself.
2) Where any fault or damage caused by force majeure, abnormal combustion or other abnormal conditions.
3) Where this warranty card cannot be presented or the recorded content in the warranty card at the time of purchase is incomplete, unclear or without the official seal of the selling