best price emergency power supply for hospitals cheap power battery
- Payment Type:
- L/C, T/T, Paypal, Western Union
- Incoterm:
- FOB, CFR, CIF, FCA
- Min. Order:
- 1 Set/Sets
- Min. Order:
- 1 Set/Sets
- Transportation:
- Ocean, Air
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | China |
|---|---|
| Productivity: | 3000000units |
| Payment Type: | L/C,T/T,Paypal,Western Union |
| Incoterm: | FOB,CFR,CIF,FCA |
| Certificate: | UL, CE, FCC, SGS |
| Transportation: | Ocean,Air |
Product Description
Product Description
best price emergency power supply for hospitals cheap power battery
Kayo Maxtar supply a wide range of power bank with portable mergency power supply, cheap power battery and emergency power source etc..with medical grade 40000mah. with Protections of short circuit, over load and over current. its a cheap power battery for medical health care.
2. USB charging for medical use input:
a:25.2V / 3A adapter; support charging and discharging function, no buttons to control input and output.
b:battery logo on the display, battery percentage display, the input parameters: 25.2V/3A.
c:the power is divided into five cells, each of the cells shows 20%, charging interval should be equalization, the error can not be more than 20 minutes, the indicator light flashes continuously increasing, 20% fulled, the first frame remain light and the left four contious flashing, 40%, the first and second one remians light and the left three coutinuous flashing until 100% full charged.
d:short press the power switch, the buzzer sounds once to display charging status and charging percentage, the screen turns off after 15s.
3.USB charging for medical use output:
a:12V/4A,15V/4A,24V/4A; three DC output port base can be switched to different output mode, the power status and output modes will be able to reflected on the screen.
b:5V/2.5A for USB output; with intelligent recognition function, automatic adaptation of Android and IOS devices, the switch control button are needn't for output.
c: DC must be able to work with SB port belt contained in any of the output voltage.
d: When the power is lower than 5%, the screem lights up and the battery logo requires constant blinking and intermittent buzzer sounded, shutdown output after 30s, the screen off.
e: Switch Mode: press the DC button once to switch to another output mode and flashing, and then press again for confirmation.
For example: now the output is 12V/4A, press hte DC button to 15V/4a and press again to confirm 15V/4A.
Without load status:
f.Starting up: keep pressing power button 10s, the buzzer sound and start output.
g.power off: without load status, it will automatically shut off the output after 20s.
Related Keywords
Related Keywords
You May Also Like
You May Also Like
