large capacity jump In-Trunk Car Jump Starter & Tire Air-pumping Device

large capacity jump durable reliable ABS In-Trunk Car Jump Starter & Tire Air-pumping Device

Car Jump Starter Function  Durable In-Trunk Car Jump Starter & Tire Air-pumping Device 
Inspection before use 
1. Confirm the engine displacement of the automobile (or other motorized ships, take the automobile as the example below) to be started is at 6L or below.
2. Confirm the battery level of this product is above 72% (the indicator light of the six battery level section is on). 
3. Check the battery clamp rubber cover is intact or is not displaced. 

Standard steps of car jump starter Durable In-Trunk Car Jump Starter & Tire Air-pumping Device
1. Firmly clamp the anode of automobile storage battery (+) with red clamp and the cathode (-) of the storage battery with black clamp; 
2. Plug the connector of battery cable into (automobile) starting power supply interface of this product. 
3. Try to start the automobile normally. 
4. After the automobile is started, immediately unplug the battery cable connector from starting interface. 
5. Remove red and black clamp (this product will automatically exit start mode) 

Precautions: Durable In-Trunk Car Jump Starter & Tire Air-pumping Device
1. Before start, ensure red and black clamp are firmly clamped and there is sufficient safety distance between red and black clamp to avoid the falling off or collision of red and black clamp caused by engine vibration after the starting of the automobile. 
2. It is prohibited to directly clamp red and black clamp, otherwise, safety accident might be incurred. 
3. After the automobile is started, please evacuate personnel to be away from engine compartment in order to prevent the personal harm caused by engine running. 
4. Take off main engine within 30 seconds after the start of the automobile, otherwise, this product might be damaged or even safety accident can be incurred. 
5. In case it is started for many times, please check the residual battery level before each time of start. 
6. People (especially children) not familiar with this product are prohibited to use this function. 

Automobile storage battery Durable In-Trunk Car Jump Starter & Tire Air-pumping Device
Red clamp 
Black clamp 

Tire Pumping Function
Pump Working Voltage: 12 V
Electric Current: ≦7A
Power: ≦90w
Working Pressure: 10 kg/c㎡
Air Displacement: 15 L/M
Air Pumping Time: 7 Minutes to 2.5kg/c㎡ tire pressure for 195/50 R16 Tire


Other functional application Durable In-Trunk Car Jump Starter & Tire Air-pumping Device
Rescue signal light and flashlight 
1. In case the vehicle is stopped due to fault or rescue is required, you can use the flashlight or rescue signal light function of this product. 
2. Make long pressing of on/off button to enter to function mode and then switch among four different kinds of mode through each time of press; LED flashlight/SOS (three long and three short)/burst flashing (LED)/ rescue signal light (white color)


LED flashlight
SOS (three long and three short)
Rescue signal light (white color)
Burst flashing (LED)

Charging of mobile phones (tablet PCs/other digital products)  Durable In-Trunk Car Jump Starter & Tire Air-pumping Device
1. The original USB charging cable of this product has its own Micro USB interface, but you can also directly use your mobile phone (digital) USB charging cable. This product supports all USB charging digital devices.
2. After the charging cable is well connected, lightly press key/on button to enter to charging state; after the charging cable is disconnected, this product will be automatically switched off.