12V 30A PWM Solar Charge Controller
-
USD38.58≥200 Piece/Pieces
- Payment Type:
- T/T, Paypal
- Incoterm:
- FOB
- Min. Order:
- 200 Piece/Pieces
- Min. Order:
- 200 Piece/Pieces
- Delivery Time:
- 15 Days
- Transportation:
- Ocean, Land, Air
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | Shenzhen China(Mainland) |
|---|---|
| Productivity: | 50,000pcs/month |
| Supply Ability: | 50,000pcs /month |
| Payment Type: | T/T,Paypal |
| Incoterm: | FOB |
| Certificate: | CE, ROHS, FCC, UL |
| Transportation: | Ocean,Land,Air |
1. Solar Charge Controller advanced MCU control pulse width modulated (PWM) technology, high efficiency operation.
2. Solar Charge Controller Target for LiFePO4, LTO (Lithium Titanium Oxide), Gel, AGM, Conventional lead-acid (WET) and Calcium Batteries.
3. The Solar Charge Controller Built in regulator to prevent your battery from being overcharged. Overcharging occurs when the charge voltage is unregulated. This can result in premature battery failure.
4. Come with regulator to prevent your battery from being under charged, in the solar energy field, battery undercharge always occurs, especially on some Conventional lead –acid or Calcium batteries; The unit provides an automatic Equalization feature for deeply drained Conventional lead acid battery or Calcium battery, as well as provides a cycling automatic Equalizing feature every 28 days.
5. Solar Charge Controller Can be connected to the battery permanently to keep the battery fully charged by using a process called [floating". This means the Solar Charge Controller will stop charging when the battery is full and will automatically start charging the battery as required. This process will also reduce water loss and help prevent the battery from `drying out`.
6. The Solar Charge Controller can Protect your battery from discharge at night. Under low light or no light conditions the solar panel voltage could be less than the battery voltage. The unit contains a special circuit which prevents current flowing back from the battery and into the solar panel.
7. Colored LED`s to easily indicate the Solar Charge Controller operational status and battery conditions.
8. Solar Charge Controller digital LCD to directly display battery voltage, charging current, charging capacity(Amp hour), battery types and faulty codes.
9. The Solar Charge Controller Provides plug-in remote digital display meter (Optional).
10. Provides external battery temperature sensor (Optional).
11. Multi charging protections against reverse polarity, short circuit, over temperature, over voltage, etc.
12. Solar Charge Controller surface Mount or Flush Panel Mount options.
13. Conformal-coating circuit boards and plated terminals apply to hostile environments.
1. For solar panel: 25V Max.
2. Rated current: 30A
3. Soft start voltage: 10.5V
4. Absorption voltage : 14.4V / 14.7V --- Sealed / Flooded Battery version.
5. Absorption voltage: 14.1V / 14.4V /14.7V /14.9V --- Gel / AGM / Flooded / Calcium Battery version.
6. Equalization voltage : 15.5V
7. Float Voltage: 13.6V
8. Self-consumption: ≤5mv
9. Loop Voltage Drop: ≤150mv
10. Voltage accurancy in LCD NA11. Current accurancy in LCD NA
12. Temp. Comp. ( mV/°C) -24
12A 30A Solar Charge Controller General Specification:
1. Compatible battery types Two or four battery types selection (depends on above different versions selected)
2. Storage ambient temperature range (°C) -40~85
3. Operating ambient temperature range (°C) -20~50
4. Dimensions (H x W x D) 156mm X 121mm X 37.8mm
5. Wire size (excluded) Up to 14 AWG
Related Keywords
