2017 hot sale five colors changing DC 12 24v 72w 60leds SMD 5050 rgb cw ww 2 in1 led flex strip 15mm pcb size

Specification

SMD 5050 60 leds rgb ww cw 2 in 1 flex strip
light color	rgb + cw ww 2 in 1
voltage	dc 12 24v
wattage	72W
lumen	20-22lm/led
IP rating	IP20
strip size	5000x12mm
Certificates	CE ROHS
Warranty	3 years

Product Description SMD LED flexible strip light adopts high brightness SMD5050 as the light source with qualified heat-resistant PCB.

It is available in pure white, warm white, cool white. 6led (12v dc) as a group and can be cuttable by different length which has the 3M adhensive tape on the back of the strip It is widely used for indoor decoration, signs, back lighting and led lighting, etc.

IP ranking

IP20 Nonwaterproof

IP67 Waterproof A: slicon glue +"u" PC tube

IP65 Waterproof B: Silicon tube (removeable)

IP65 Waterproof C: Dropping silicone glue

IP68 Waterproof D: Silicon gel injected

Product Feature 1.Green Products
2.High efficiency, low heat, energy saving 90% compare with glass neon.
3. Ultra-high brightness, lighting LED Uniform and soft.
4.Flexibility,easy to bend in any shape
5.Cuttable length 3LED/circuit
6.Envionment Friendly,No UV,No IR radiation, No Mercury
7.Sepecification customization is available on request
Application 1. Building decoration.
2. Car decoration.
3. Amusement park and theater lighting.
4. Emergency hallway lighting.
5. Archway, canopy and bridge edge lighting.
6. Shopping mall, restaurant, hotel, meeting room and advertisement lighting and decoration.
7. Channel letter lighting using for stores, restaurants, bars

QAS-WW+CW 2 IN 1	QAS-RGB	QAS-RGB+W	QAS-RGBW 4 in 1
SMD5050 96leds	SMD 5050 60leds	SMD 5050 60leds	SMD 5050 60leds
23W/m	14.4W/m	14.4W/m	19.2W/m
Input Voltage	DC 12/24V	DC 12/24V	DC 12/24V

Installation Process Applications Certifications Company Information FAQ Q1. DO you supply waterproof led strip lights? A: Yes we do. All of our LED strip lights are available in four versions. When placing your order, you can choose from IP65 67 68  .The waterproof options allow you to fit your LED strips in places where resistance to water is required (for example, the kitchen, bathrooms etc).

They can also be fitted externally, making them ideal for signage.

Our IP65 LED strips are wrapped in specialized heat shrink coating, which has May advantages over traditional resin coverings. It does not discolor over time, cold doesn’t make it become brittle, and it’s very easy to cut and solder.

For our IP68 LED strip lights, we use the same heat shrink coating but we fully glue seal the ends as well. IP68 rating means your strip lights are fully waterproof, but please be aware they should not be fitted in any location where they will be permanently submerged. Q2. What light colors can RGB / RGBW LED strips produce? A:The answer to this question depends on the type of LED controller that you are using. 

In general terms, your RGB strip has the ability to produce any color by simply mixing the three primary colors – red, green and blue.

RGBW LED strips offer even great flexibility, with the option to also add dedicated white light to the mix; this opens up an even bigger palette of color tints and pastel shades. If you want to set your color-changing LEDs to produce white light, you can do this with either RGB or RGBW strip lights.

RGBW LEDs are manufactured with this requirement in mind, so they offer the best and easiest solution: each RGBW LED has a fourth color chip (choose either warm white or pure white), which you can set to produce white light without the need to do any color mixing. RGB LED strip lights can produce a perfect pure white by mixing their three colors equally. If you prefer warmer white shades, though,you’ll probably find RGBW LED strips to be a better alternative. Q3.How do I position and attach my LED strip lights? A: All of our LED strips are supplied with 3M self adhesive tape on the back. Simply clean the wall or other surface where your LEDs are to be fitted,then peel and stick your color changing LED strips into place.

Our LED strip lights are all extremely flexible – making them ideal for installation in a wide variety of projects and applications.And waterproof strips are just as flexible, because they are protected with very thin heatshrink coating.

NB: When pushing down on your RGB LED tape, be careful to press on the PCB rather than the resistors or LEDs. Q4. Must I order my RGB / RGBW LED strips pre-cut, or can I cut them myself?
A: Yes, you can cut your RGBW and RGB LED strips yourself.

Using normal scissors, simply cut along any of the designated cut-points (they’re typically marked with a small scissor icon along the cutting line).

Please make sure your RGBW or RGB strip is powered off before cutting!!! Q5. How far away can I have the transformer from the LED tape?
A:The transformer can be as far away as you require from the start of the LED tape as long as you use the correct thickness cable. For a distance of up to 10m you should use at least 1mm cable. For a distance of up to 15m you should use at least 1.5mm cable. For a distance of up to 20m you should use a cable of at least 2mm thick. For a distance of up to 25m you should use a cable of least 2.5mm thick.

For single color LED tape you would use 2 core cables and for RGB LED tape you would use 4 core cables. Q6. Do I have to clean the surface before sticking the LED tape down?
A: Yes you do. Give the surface a good clean first before attempting to stick the LED Tape down. Make sure all dirt is removed and you use a good cleaner and then once dry you can stick the LED tape down. You can also use a small amount of hot glue at the ends of the LED tape if you prefer for extra support.
Q7: Can I bend the LED tape round a 90 degree corner?
A: Yes you can. Any LED tape that has 60 LED’s per meter or less you can actually loop up the LED tape and fold it back on itself to bend around a 90 degree corner.We would however recommend that Ourleds pre solders a linking cable instead of this as it is more reliable and there is less likely the chance of damaging the LED tape.
Q8:What is the difference between a driver and a transformer? A: Some people use the word driver and others use the word transformer. At QAS LED they are both exactly the same thing. They are a product that transforms mains AC110v/220v down to either 12v or 24v to run the LED tape. People often use the word driver as it drives (powers) to the LED tape.