Plc series smart and intelligent streetlight single light led controller

Product Description Model No.: LYL201/LYL202/LYL203/LYL204 Single light controller    1. Introduction of the system   With the advanced plc technology, combined with GPRS, WiFi technology and embedded system, proposed wireless networking, single&multi point control solution for city LED streetlight lighting control system status, energy saving and actual demand of accurate control to realize remote control single lamp switch, dimming and detection,etc.   In the client side to adopt mobile phones, tablet PCs, computers, convenient for different personnel to control the important data in the street.    The system is widely used, such as: intelligent residential area (Park) lighting, intelligent landscape lighting, tunnel lighting, highway and other intelligent lighting occasions.   2.The Structrure of plc system     3.Main parameters

Working temperature:	-20℃- +60℃
Supply voltage:	AC 90V-240V
Network type:	Star network, mesh network(MESH)
Communication mode:	GPRS,WIFI,Ethernet
Network capacity:	200 network nodes
External dimension:	L202.17*W133.12*H96mm
Transmission distance:	200m
Input power supply:	AC 220V 50Hz
Output power supply:	AC 220V 50Hz
External dimension:	L141*W63*H38mm
Package dimension:	L180*W85*H60mm
Net weight:	359g
Gross weight:	449g
Static power consumption:	less then 3.0W

    4. Functional characteristics 1).Suitable for electric power environment 220VAC power line. 2).Power line carrier signal reception sensitivity up to -60dBV. 3).Support 1997/2007 - DL/T645 communication protocol. 4).Support node sense, node relay, phase detection function. 5).Support single phase and three phase power access mode. 6).Dynamic network automatic routing, no relay level restrictions 7).Provide convenient configuration tool. 8).Power line carrier communication in line with EIA-709.2, EIA-709.1 and other standards in line with international standards. 9).The transmission amplitude of the power carrier signal is 2-5Vpp, under the condition of 1 ohm load. 10).To provide 1 PWM signal output, or 0-10V voltage signal output, can be used to adjust the light signal LED. 11).Relay contact capacity up to 10A/250VAC. 12).Design of overload protection based on Security. 13).Perfect power line communication protocol. 14).Perfect networking protocols and relay forwarding technology, to support inter grid communication, the most distant coverage of up to 16 km. 15).Power line carrier frequency: /125kHz 290KHz. 16).Modulation mode: zero crossing dual mode / narrow band communication. 17).Interface type: TTL level serial interface TXD, RXD. 18).Can be used to view the status of each node with the host computer.   5.External dimension:    6.Wiring instruction 1). Two core wire: Red L, Blue N connect AC220V the power input line. 2). Four core wire Power output and 0-10V signal line, red L, black N, connect the power supply port of load lamp; Brown: positive pole of 0-10V, blue: 0-10V negative pole, connect connect the power supply port of load lamp.   Company Information https://www.leyview.com/en/   Leyview (Shenzhen) Intelligent control co., Ltd. is a lighting control system and intelligent products based brand company, committed to the development and production of control system, to provide professional lighting control systems and solutions. In the field of intelligent control to their own core technology, build Leyview brand.  We always adhere to the "brand management as the core" concept, customized new sales model, management and price system; Adhere to the "mutual benefit and win-win" approach and long-term friendly cooperation between distributors, application in such a way, consistent brand building.  Leyview is a group of geese flying in the sky, we share a common goal, with the help of along the way with each other better forwarder the flight.       Our Services  Presale service: 1.24 hours free consultation
2.Provide product information
3.Provide professional technical support
4.Provide the system of bidding scheme
The sale of services: on time, according to quality, to provide customers with products
After-sale service: 1.Professional product training
2.Provide professional and technical personnel to install, debug
3.Regular telephone or on-site visit
Special service: 1.Provide 3 year warranty period, the implementation of "three" service
2.All of our products have the relevant professional certificates, such as: CE, RoHS, UL, CCC, FCC, CSA etc.
At the same time, we can also do the relevant certification according to the customer demand.
3.Provide the only global identification code.       Quality assurance   To ensure the products’ quality, products’ safety, and clear responsibility of both parties, especially for the following assurances: 1. All products have qualified the "quality inspection report" and related product certification, comply with the relevant provisions of the corresponding country. 2. To ensure that the secretary for the products meet quality standards of corresponding regions and are responsible for the quality of products. Provide the necessary quality information to distributors when necessary, such as product testing reports,etc.. 3. Product packaging, trademarks, etc. comply with the relevant provisions of the corresponding country. 4. Distributors should operate strictly according to the method of product specifications, distributors should be responsible to product quality problems caused by their improper use of the products.  5.For product quality problems distributors blamed, Leyview will actively cooperate with the proper solution, if be our responsibility, we’ll fully assume. 6. The quality issues: distributors should be in strict accordance with the formulated technical standards of our products for inspection, ensure a fair and scientific test, for the remainder samples of unqualified shall be retained for 1 week. 7. A warranty period of 3 years from the date of purchase(shall prevailed by the date of purchase invoices). 8. During warranty period, the product failure occurs during normal use, offer free repair service, but the damage caused by the flood, fire, earthquake or other force majeure aren’t covered under this warranty, but still provide paid services. 9. Product failure beyond the warranty period, our company continued to provide maintenance, parts replacement and other services, charge a service fee. FAQ   Question 1: Are you a factory or a trading company? Answer: We are a factory. Question 2:  What's the main business of Leyview? Answer: Leyview committed to the development and production of control system, to provide professional lighting control systems and solutions. Question 3: What' s the main products of Leyview? Answer: We focused on streetlight lighting control system(Zigbee/PLC/RS-485), general control system(DMX) and commercial lighting control system(DALI). Question 4:  What Leyview will do if we have problems after receiving your products? Answer: Our products have been strictly inspected before shipping. Once you receive the products you are not satisfied, please feel free to contact us in time, we  will do our best to solve any of your problems with our good after-sale service. Question 5: How about your sales model? Answer: We establish the brand as the foundation, with the constant expansion of the brand influence, distributors will replace the ordinary sales model of the market as our main sales channels.