PWM LED double lights wireless remote led streetlight lighting system

Product Description     Name: 0-10v single light/double lights node controller for streetlights Model No.: LYL111/LYL112/LYL113/LYL114   1. Introduction of the system With the advanced wireless ZigBee technology, combined with GPRS, WiFi technology and embedded system, proposed wireless networking, single&multi point control solution for city LED streetlight lighting control system status, energy saving and actual demand of accurate control to realize remote control single lamp switch, dimming and detection,etc. In the client side to adopt mobile phones, tablet PCs, computers, convenient for different personnel to control the important data in the street.  The system is widely used, such as: intelligent residential area (Park) lighting, intelligent landscape lighting, tunnel lighting, highway and other intelligent lighting occasions.   2.The Structrure of zigbee system     3.Main parameters

Working temperature:	-20℃- +60℃
Operating voltage:	DC12V
Communication protocol:	Zigbee wireless
Operating frequency:	2.4GHz
Networking:	Zigbee MANET
Network protocol:	Zigbee IEEE 802.15.4
Outout:	4 loop PWM
Transmitting power:	-1dbm
Receiving sensitivity:	-91dbm
Dimming way:	0-10v dimming,PWM

    4.External dimension:   5.Interface description(Air plugs firmware 2)    

NO.	Function	Description
1	Antenna	Send and receive wireless signals
2	Status indicator	Green light flashes once,means slaver received the data from master
3	Power indicator	Indicator always on means power normally
J1	PWM-CH1	PWM channel one output
J3	Power input(V+)	Connect with power anode(12V)
J4	PWM-CH4	PWM channel four output
J5	PWM-CH3	PWM channel three output
J6	PWM-CH2	PWM channel two output
J7	Power input (V-)	Connect with power cathode Connected to the load lamp ground (GND)

     6.Operation instruction   1.According to the interface illustrating access the power of slaver(reference No.J3), if with PWM signal, terminals (No.J7, J1, J6-J4). 2.Insert the master connected to the power, ensure that the voltage is correct, then the power indicator lights red. 3.After slaver power on, if the green light flashes once, means the slaver is automatically added to the master network. 4.The output channel of slaver can adjust brightness by Andrews and IOS software ,also adjusted by buttons.   Company Information Established in 2005, we are professional maufacturer in the research, development and production of intelligent controller,switch,dimmer for lighting system.  1.We are located in Baoan district, Shenzhen City,China,closed to the shenzhen airport,convenient for the visit ! 2. Years  menber of Alibaba 3. Products are approved with CE,RoHs,Fcc,SAA,UL ,ETL certificate. 4.Every year we attend the  Guangzhou optical sub Exhibition 
  We adheres to "convenient, efficient, intelligent" which guarentees products quality and customer service. Intelligent integrated into life, make life more convenient.       Our Services       Quality assurance   To ensure the products’ quality, products’ safety, and clear responsibility of both parties, especially for the following assurances: 1. All products have qualified the "quality inspection report" and related product certification, comply with the relevant provisions of the corresponding country. 2. To ensure that the secretary for the products meet quality standards of corresponding regions and are responsible for the quality of products. Provide the necessary quality information to distributors when necessary, such as product testing reports,etc.. 3. Product packaging, trademarks, etc. comply with the relevant provisions of the corresponding country. 4. Distributors should operate strictly according to the method of product specifications, distributors should be responsible to product quality problems caused by their improper use of the products.  5.For product quality problems distributors blamed, Leyview will actively cooperate with the proper solution, if be our responsibility, we’ll fully assume. 6. The quality issues: distributors should be in strict accordance with the formulated technical standards of our products for inspection, ensure a fair and scientific test, for the remainder samples of unqualified shall be retained for 1 week. 7. A warranty period of 3 years from the date of purchase(shall prevailed by the date of purchase invoices). 8. During warranty period, the product failure occurs during normal use, offer free repair service, but the damage caused by the flood, fire, earthquake or other force majeure aren’t covered under this warranty, but still provide paid services. 9. Product failure beyond the warranty period, our company continued to provide maintenance, parts replacement and other services, charge a service fee.     Certifications   FAQ   Question 1: Are you a factory or a trading company? Answer: We are a factory. Question 2:  What's the main business of Leyview? Answer: Leyview committed to the development and production of control system, to provide professional lighting control systems and solutions. Question 3: What' s the main products of Leyview? Answer: We focused on streetlight lighting control system(Zigbee/PLC/RS-485), general control system(DMX) and commercial lighting control system(DALI). Question 4:  What Leyview will do if we have problems after receiving your products? Answer: Our products have been strictly inspected before shipping. Once you receive the products you are not satisfied, please feel free to contact us in time, we  will do our best to solve any of your problems with our good after-sale service. Question 5: How about your sales model? Answer: We establish the brand as the foundation, with the constant expansion of the brand influence, distributors will replace the ordinary sales model of the market as our main sales channels.     Contact us     Tel: 0086-755-29686602
Fax: 0086-755-29681865
Address: 2/F,2 Building,East side,Dacheng Industrial Zone,No.124,Zhoushi Road,Shiyan Street,Bao’an District,Shenzhen,Guangdong,China.