
Epoxy Resin AB Glue for Floor Coating
- Delivery Time:
- 7 Days
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Place of Origin: | Guangdong, China (Mainland) |
---|
Product Description
Product Description
Product Description MTB-6601 Epoxy Resin AB glue for Floor Coating and Painting
Features It is a kind of high cleanliness ground adornment material, smooth bright and can meet the requirements of high cleanliness Wide application
Widely used in electronics, precision instruments, hardware factory, mold factory, warehouse, underground garage,office ,living room ,bedroom etc. Have high request for the ground. Base Technical Data Sheet
Operation Process Operation Process 1. Mix the A, B two components with the mix ratio of 1:1 by weight , with special portable electric mixer, fully stir stir for about 3 mins
2. On the clean cement floor, coat the glue on the ground with a trowel to stir large batch on the coat, the local corner, outlet available with small scraper blade coating.According to your own situation to decide the coating times to gain the effect of being smooth and no holes, no batch of knife is printed and frosted.
3. According to the room temperature to confirm the cure time (6 hours in common) ,after being completely cured, carefully check whether there is any bump, if have on the ground and necessary,polish with Angle mill grinding and dust collection, shall be for the following process.
Technical Index
Related Products





OEM Service You can buy the transparent glue,then mix with various pigments color as you prefer ,then make the colorful finished floor . Here is the color swatches for your reference .
Packaging & Shipping


Item | Epoxy Resin Glue for Cement Floor Coating |
Main Material | Epoxy resin ,hardener,pigments,thinner and so on . |
Appearance | Clear and matte type for your choice |
Coating Thickness | 0.5-0.7mm,you can adjust according to your situation |
Using life | More than 5 years |
Color | Clear ,green and grey and can do as your requirements . |
2. On the clean cement floor, coat the glue on the ground with a trowel to stir large batch on the coat, the local corner, outlet available with small scraper blade coating.According to your own situation to decide the coating times to gain the effect of being smooth and no holes, no batch of knife is printed and frosted.
3. According to the room temperature to confirm the cure time (6 hours in common) ,after being completely cured, carefully check whether there is any bump, if have on the ground and necessary,polish with Angle mill grinding and dust collection, shall be for the following process.

Item | Figures |
Compressive Strength(Mpa) | ≥85 |
Bending Strength(Mpa) | ≥40 |
Tensile Strength(Mpa) | ≥9 |
Impact Resistance(kg.cm) | ≥50 |
Flow Property(min) | ≥8 |
Surface Coating Density(g/cm³) | 1.3±0.1 |
Water Resistance(30days)/Oil Resistance(72h) | No Changing |
Curing Time (h) | ≤6 |
Drying Completely(h) | ≤24 |









Related Keywords
Related Keywords