Shenzhen Meitaibang Chemical Co., Ltd.
Shenzhen Meitaibang Chemical Co., Ltd.
Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
  • Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
  • Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
  • Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
  • Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
  • Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
  • Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway
Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway

Liquid Epoxy Resin for Bonding Aggregates for Pavements/Driveway/Pathway

Delivery Time:
7 Days
Quantity:

Your message must be between 20 to 2000 characters

Contact Now
Basic Info
Basic Info
Place of Origin: Guangdong, China (Mainland)
Product Description
Product Description
  MTB-5803 Clear Epoxy resin AB Glue for Bonding Aggregates for Pavements/Driveways/Pathways       Instruction  It is two-component, solvent free, adhesion-modified, aliphatic polyurethane systemspecially formulated for aggregate binding applications. When cured,has excellentadhesion to bituminous and concrete surfaces and to most aggregates, aggregate chippings or pebbles,including calcined bauxite,\granite, limestone, marble, Derbyshire spar, basalt, silica sand, flint, calcinedflint, rounded gravel and Bridport stone. It is supplied as two pre-weighed components in a single container which should be mixedbefore adding to the aggregate. Itproduces a completely clear non-yellowing film using dustfreeaggregate.   Choice of suitable aggregate for use with MTB-5803is critical as detailed below. If you are unsureabout the suitability of your chosen aggregate please consult MTB who will test the aggregatesperformance.   Typical Application Note: It contains only aliphatic isocyanates and will not yellow when exposed to sunlight.   Itis particularly suited for use in pebble binding applications where the product is mixed withaggregate, which is then laid as a screed over the surface to be covered. A clear polymer results, allowingthe color of the stone to show through. A wet look is imparted to the stone leaving a glossy finish. It isvitally important that the stone is free from dust. This will mask the color of the stone if dispersed intothe binder and will obscure the natural color of the stone and will soak up binder.   Processing & Application Specially washed, screened and dried, dust free aggregate for resin bound use must be used in conjunction with MTB-5803. The aggregate supplier should be informed of the end use. Dust-free gravel of up to 10mm (ideally 6mm) is often chosen for tree pits, for example. It should only be used with dry aggregate.  

Item

Agent A

Agent B

Appearance

Clear Liquid

Clear Liquid

Mix Ratio(by weight)

1

1

Color

Clear

Clear

Viscosity @ 25°C (cps)

10000

3000

Specific Gravity

1.14

1.09

Curing Time(mins)

About 15-30mins ,completely dry within 24h

Shelf Life(m)

12-24m

  Packages.   It is 3kgs/set,15kgs/set,30kgs/carton .   Storage At dry and cool place below the temperature of 25℃.   Related Finished Examples 

Send your message to this supplier

  • Mr. Jianjun Qiu

  • Enter between 20 to 4,000 characters.

Product Categories