Superior Solvent and Water Resistance Epoxy adhesive for Household and Automotive Repair

Product Description Water Resistant ,Two-part Formula, Gap-filling Adhesive for household and automotive repairs alike. TOUGH, CLEAR, SERIOUS STRENGTH EPOXY

MTBJZJ takes epoxy to a new level—the Gorilla Tough level. With its superior solvent and water resistance,MTBJZJ Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won’t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, crystal-clear finish that makes projects look spotless.

PRODUCT FEATURES
• Dries Clear: Ideal for clean, easy finishing

• 5 Minutes Set: Plenty of repositioning time for the perfect fit.

• Gap-Filling: Fills voids and bonds uneven and vertical surfaces.

• Water Resistant: Withstands moderate exposure to water

• Solvent resistant

• Non-Toxic once cured

• Easy-to-use syringe: Separate barrels of epoxy resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses. 
• Indoor & Outdoor Epoxy
 •Excellet Bond Strength Technical Data Sheet

Item	Pack	Color		Mix Ratio	Viscosity (mpa.s)		Curing Time  (min/hour)	Hardness (Shaw’s)
		A	B		A	B
MTB-301	25G	Clear	Clear	1:1			5mins/24h	D90
MTB-302	25G	Clear	Clear	1:1			30mins/24h	D85
DP-601	25G	Clear	Clear	1:1	9500	2800	5mins/24h	D85
DP-642	25G	Clear	Yellow	1:1	11000	11000	3mins/24h	D90
DP-402	25G	White	Clear	1:1	4500	4000	60mins/24h	D85
DP-901	25G	Clear	Clear	1:1	4000	3500	5mins/24h	D80
DP-902	25G	Clear	Clear	1:1	4000	3800	30mins/24h	D85
DP-903	25G	Clear	Clear	1:1	4000	3500	60mins/24h	D85
DP-990	25G	Clear	Clear	1:1	15000	13000	60mins/24h	D85

Notes:Beside the 5mins set models ,we also supply other curing times for your choice ,for DP-990 ,it is high temperature resistance to 260 ℃ USING DIRECTIONS 1. Prepare Your Work Area and the Surface If you’re using MTBJZJ Epoxy for the first time, or bonding a new type of material, we always recommend trying a test piece first.

Prepare your work area: It is recommended to use MTBJZJ Epoxy in a well-ventilated area. Be sure your work area is protected from spills. Gather your mixing tray and stir sticks so that all your supplies are together.

Prepare the surface: To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded.
2. Mixing Epoxy Remove the black cap from the two syringes. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip.

Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. The package itself can be used as a mixing tray. If you flip the plastic blister shell over, you can use the small well as a starter dish to begin dispensing until both the resin and hardener are flowing equally. Once the flow is even, move to the larger mixing well to dispense your even ratio.

Mix the two parts for about 20 seconds, until the mixture is uniform. Apply within 5 minutes.

As you mix, you will notice that the epoxy warms up. This is a reaction that occurs as the resin and hardener combine.

3.Application After mixing is complete, apply MTBJZJ Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping To reach maximum bond strength, clamp project together and leave undisturbed.

Important Cure Times

Set: 5 minutes to apply and position

Handling: Allow to cure for 30 minutes undisturbed (no weight or handling)

Final Cure: Allow 24 hours for load-bearing weight

Storage: To close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly.

Detailed Images FAQ 1.What surfaces will Gorilla Epoxy bond? MTBJZJ Epoxy is very versatile. It boasts high-strength results for steel, wood, aluminum, ceramic, tile, glass, most plastics, pressure-treated lumber and much more!
2.Is MTBJZJ Epoxy waterproof? MTBJZJ Epoxy is water resistant, which means it will resist moderate exposure to water but should not be fully submerged. If you need an adhesive that is 100% waterproof
3.What is the shelf life? Are there storage tips to extend the shelf life? Shelf life for MTBJZJ  Epoxy is a maximum of two years. The adhesive is not activated until the resin and hardener come in contact with one another, so the shelf life is likely to be much longer if the epoxy tip is wiped clean after each use and the cap is securely replaced. Make sure you notice the notch on the cap and be sure to align that with the notch on the syringe tip. This will further ensure the two parts do not accidentally mix.
4.Is MTBJZ Epoxy gap filling? Yes. MTBJZJ Epoxy is gap filling. It will fill voids and bond uneven and vertical surfaces. If filling gaps outdoors, note that Gorilla Epoxy may yellow over time with exposure to sunlight.
5.How do I remove MTBJZJ Epoxy? MTBJZJ Epoxy is a very strong adhesive and is solvent resistant. Removing dried adhesive is difficult to do. Acetone will soften the epoxy; however, full removal will require mechanical means, such as scraping, rubbing, or sanding
Uncured Removal:
Skin:Acetone, isopropyl alcohol, 2–3 washings with soap and water. Reminder: Cured glue requires mechanical means, such as rubbing or washing with exfoliating soaps.
Hair: Isopropyl alcohol
Clothes and Carpet:Isopropyl alcohol. For clothes and carpet, avoid acetone, soap and water, and mineral spirits, as they will not work well on fabric.
6.What is the best application temperature? For best results, apply in room temperature situations. Application in cold temperatures will slow the cure time of MTBJZJ Epoxy, while application in hot temperatures can speed up the cure time.
MTBJZJ  Epoxy’s cured bond withstands temperatures ranging from -10° to 180°F.
8.Do I need to use clamps with Gorilla Epoxy? How long? Clamps are recommended for use during setup to ensure the bond sets correctly.

Set Time: 5 minutes to mix, apply and position

Handling Time: Leave 30 minutes undisturbed (clamping is recommended)

Full Cure Time: 24 hours for load-bearing weight
9.How much MTBJZJ Epoxy do I apply? MTBJZJ Epoxy is a very strong adhesive. It does not take a lot to get a strong bond.

Average coverage from our 25 mL epoxy syringe will cover 100 square inches.
10.What can I use as a mixing tray or stir stick? A mixing tray and stir stick will be included in your MTBJZJ Epoxy package. Other ideas for mixing trays include aluminum foil trays, cardboard, or paper/plastic plates. Try using popsicle sticks, plastic utensils or straws for mixing.
11.How do I dispense MTBJZ Epoxy? Make sure all surfaces are clean, dry and free of oil. To improve adhesion, roughen up smooth surfaces with sandpaper before gluing. Remove black cap from the middle of the plunger. With tip pointing upward, snap end from tip of syringe. Slowly push plunger until resin and hardener are at the tip, then dispense evenly. The package blister can be used as a mixing tray. Mix for at least 20 seconds until the mixture is uniform. Apply to surface within 5 minutes. Clamp surfaces together or leave undisturbed for 30 minutes. To close, pull plunger slightly back. Wipe syringe tip with a clean, dry cloth then snap the black cap on tightly.
12.What is MTBJZJ Epoxy? MTBJZJ Epoxy is a two-part formula that requires equal parts of resin and hardener mixed together for activation. For best strength results, mix a 1-to-1 ratio of resin and hardener. Once mixed, MTBJZJ Epoxy is capable of bonding many materials and offers high strength results.
Packing & Delivery