220V 110V AC rolling door motors transmitter and receiver YET845

    220V 110V AC rolling door motors transmitter and receiver YET845
  Features: 1. Realize motor corotation, reversal and pause 2. Can be connected to the upper and lower limit switches 3.Can be connected to indicator light. 4. Running time can be set 5. Optional self-closing delay 6. Can rebound when meet with resistance if connected to the sensor 7. 1 or 4 key Control mode selectable 8. The controller can be locked or unlocked by remote control   220V 110V AC rolling door motors transmitter and receiver System Specifications:   Remote control: Frequency: 433.92 MHz Voltage: 12V Operating mode: 1key/4key UP: control gate running up DOWN: control gate running down STOP: control gate to stop LOCK/UNLOCK: press and hold 3” receiver be locked,press and hold 3” again receiver be activated   Receiver: Working voltage: 220VAC Working current: <100mA Frequency: 433.92Mhz Maximum capacity for remote: 80pcs fixed code/learning code or 15pcs rolling code Maximum running time: 4min Maximum self-closing delay time: 10min Size & Weight: 123*78*35mm,   Main function operating: Before working: 1.Remote control learning Hold pressing the “LEARN” button until the red LED extinguish, then release the “LEARN” button, then the controller-related information is deleted, restored to factory settings (running time 60S, self-closing delay time 30S); press “LEARN” button again, red LED lit, and release the “LEARN” button, LED extinguish, indicate receiver turn into learning state, press any key except for D key on the remote control to learn, LED flashes five times indicate learning success. 2. Maximum running time setting After learning remote control, press “B” on the remote control, door moving down until door fully reach down limit switch, and then press the “TIME” button on receiver, the red LED lit, release the “TIME” button, LED remain lighting Always, then press “A” on the remote control, the red LED and indication relay will flash ever 600ms, the controller remains in this state until the door fully reach up limit switch, and then press “B” on remote control, red LED and indication relay stop flash, success to set maximum running time. 3. Self-closing delay time setting Press “TIME” button, the red LED lit, release the TIME button, LED stays on, then press the “C” key on the remote control, the red LED and indication relay will flash ever 250ms, the system remains in this state until “C” button is pressed again, then success to set self-closing delay time. 4. The system mode settings Select the 3 modes AC, L/R, 1/4KEY depend on environment. AC---enable this mode to start the self-closing delay time. System will perform self-closing action after delay time. L/R--- this mode is enabled, Uplink and Downlink will be exchanged 1/4KEY---this mode is enabled, only 1 key on remote control to control system.   On Working: 4KEY mode The uplink and downlink output can be set via L/R mode, uplink and downlink is described below base on L/R mode is notenabled. Upward movement: When the door is in the case of non-full opened or upward movement of non-being, you can press “A” control system to execute upward movement, in the upstream process, you can control door to stop and reverse downward movement. Each time updates run action, the maximum running time is reset. If you do not change the running motion, upstream action will stop until the door arrive at up limit switch or the maximum running time over. At this time if AC is enabled, the system start time for self-closing delay, in timing process if encounter obstacles or received signal from “C” button (stop button), the time period is cleared, re-timing. Running downstream action when timing is over. Downward movement: When the door is in the case of non-fully closed or downward movement of non-being, you can press “B” control system to execute downward movement, in the downstream process, you can control door to stop and reverse upward movement. Each time updates run action, the maximum running time is reset. Downstream process, if encounter an obstacle, the system will repeat upward movement after delay 0.5 second.   1KET mode The uplink and downlink output can be set via L/R mode, uplink and downlink is described below base on L/R mode is notenabled. Movement process: Under 1KEY mode, only use 1 key has been learned to control upstream - Stop - downstream - Stop - upward circular motion, other things same with 4KEY mode.    Our Company,Shenzhen yaoertai technology development Co.,Ltd,has been specialized in this line since 2004,products with CE & ROHS certificates. we are one of the biggest supplier of RF remote controls,controllers in China.products are enjoying big market in world market with the best quality and the most competitive price!        &amp;lt;img src="https://g02.s.alicdn.com/kf/HTB1W6phFVXXXXaWXpXXq6xXFXXXB/200365349/HTB1W6phFVXXXXaWXpXXq6xXFXXXB.jpg" alt="2 channels 12V 24V rf receiver controller" ori-width="544" ori-height="800"&amp;gt;&amp;lt;img src="https://g04.s.alicdn.com/kf/HTB1Au0EFVXXXXXfXVXXq6xXFXXXa/200365349/HTB1Au0EFVXXXXXfXVXXq6xXFXXXa.jpg" alt="2 channels 12V 24V rf receiver controller" ori-width="715" ori-height="498"&amp;gt;      &amp;lt;img src="https://g04.s.alicdn.com/kf/HTB1zdhNHXXXXXXaapXXq6xXFXXXs/200365349/HTB1zdhNHXXXXXXaapXXq6xXFXXXs.jpg" alt="2 channels 12V 24V rf receiver controller" ori-width="497" ori-height="497"&amp;gt;&amp;lt;img src="https://g04.s.alicdn.com/kf/HTB1iN42HXXXXXXDXXXXq6xXFXXXt/200365349/HTB1iN42HXXXXXXDXXXXq6xXFXXXt.jpg" alt="2 channels 12V 24V rf receiver controller" ori-width="687" ori-height="942"&amp;gt;                      &amp;lt;img src="https://hz00.i.aliimg.com/img/pb/711/248/601/601248711_813.jpg" alt="2 channels 12V 24V rf receiver controller" ori-width="449" ori-height="642"&amp;gt;&amp;lt;img src="https://hz00.i.aliimg.com/img/pb/311/036/587/587036311_309.jpg" alt="2 channels 12V 24V rf receiver controller" ori-width="451" ori-height="642"&amp;gt;          Our Services         1.  your inquiry related to our products or prices will be replied immediately once we received it,pls understand some delay for time difference.thanks in advance!
2.well-trained and experienced staffs to answer all your enquires in fluent English
3.OEM&ODM,any your customized products we can help you to design and put into production
4.Protection of your sales area, ideas of design and all your private information

 
Trade Term:
1.T/T payment only 30% deposit 70% balance before shipment;
2.Sample can be delivered within 3 days;
3.Shipping freight are quoted under your requests;
4.Discount are offered based on order quantity;
5.FOB price are quoted under enquiry.