Calibration Unit For the Microwave Barrier Digital Debugging Box

The MCB-200 is a bistation microwave detector for outdoor applications, it comprise a transmitter (T) and receiver (R). when mouted facing each other, create a protected area with length up to 200m. width of the protected area vary. according to the distance between the two units and the selected system sensitivity.   The MCB-200 is designed to protect large part of protected perimeter and can easily be installed on any type of fence or pole in order to provide a solid barrier protection and block all perimeter activities. this barrier rejects alarms from birds and small animals due to its original method of false alarm elimination.   Several MCB-200 systems can be combined in order to provide a complete perimeter protection with unlimited space or shape. which is designed for continuous round the clock operation Detection Range: 200m Operation Temperature: -40 °C -65 °C Power input: 10.2-30V DC High RFI/EMI immunity Protection force: direct sunlight, wind up to 30m/sec, snow and rain precipitation ( up to 30mm/h), small animals, ground swing, snow and glas up to 0.3m. Making alarm when human intruders walking, running or crawliling with speed from 0.2 till 10m/s, applying 5-30 Volts from control unit to the terminal marked.       Cross Installation   In order to avoid dead zones under aerials, and to increase the protected area. it is possible to install multiple MCB-200 systems connected together with overlapping. overlap configurations are performed with the units located at the angles of protected area. the minimum overlap for sufficient coverage must be at least 1.5-2M. the optional way is to install transmitters (T) only or receivers ( R) at the point of overlap.         SPECIFICATIONS  

microwave frequency	10.525GHz
modulation frequency	1.0KHz
maximum transmitting power	35mW(continues) 50mW(peak)
scope(length of protection zone)	Max.200m
lobe width	approx.5m
lobe height	approx.2.5m
rated power supply voltage	12-24V
range of power supply voltage	10.2-24V
current consumption	70mA at 24V DC
relay contacts values	NC 2V DC, maximum current 0.1A
alarm period	3 sec ( max.)
tamper switch	NC 28 V DC maximum current 0.1A open when cover is removed
detection speed(target velocity)	0.2-10m/sec
remote testing	built in self test generator simulates acutal intrusion signals
flatness of ground	approx.0.3m
maximum height of grass on the ground	0.3m
maximum height of snow on the ground	0.5m
alarm output-switching over of relay contacts for the time	minimum 3 sec
dimension of unit(trans./rec.)w/o bracket	158*113*46mm
weight(T,R and accessoires)	1.1kg
operating temperature range	-40C-65C
ralative humidity	up to 98%
weatherproofing	all openings with gasket and sealed conformal coated circuit board aganist snow and rain up to 30mm/hour.