
High Quality IP65 LED Wall Pack Lights for Home
-
$34.902-49 piece
-
$33.5050-199 piece
-
$32.80200-499 piece
-
$32.50≥500 piece
- Min. Order:
- 1 piece
- Min. Order:
- 1 piece
Your message must be between 20 to 2000 characters
Contact NowPayment Type: | L/C,Western Union,D/P,D/A,T/T,MoneyGram,Paypal |
---|
High quality outdoor lamp led light IP65 wall pack LED wall pack with DLC
Benefits
1.Replace conventional wall pack light.
2.Internal with heatsink + shading roof design.
3.Streamline design with small size,save shipping cost.
4.Easy installation.
5.ETL CETL DLC SAA TUV CE ROHS listed.
Features
1.Beam angle:100*100 degrees.
2.Indetnal with heatsink with shading roof design,diecasting house with super great heat dissipation ability.
3.Green ,energy saving,long and relialble life of 50,000 hours.
4.No RF interference ,no IR / UV radiation,no mercury pollution.
5.Wide colour availability in degrees Kelvin(K),2700-6700K.
6.Environment friendly ,energy saving (70%~80%).
7.Intelligent temperature control branded driver used with 5 years long time warranty,aluminum drive house with IP67 waterproof ,and it can fast conduct the heat from the driver to be out.
8.Branded 3030 led used ,high lumen ,long lifetime ,whole lamp over 130lm/w one led broken,all other leds still working.
Application
1. Building facades lighting.
2. Parking lot lighting.
3. Garages lighting.
4. Sidewalks lighting.
5. Loading areas lighting.
6. Other outdoor places lighting.
Specifications
Power | 35W | 55W | 80W | 100W |
Model | BB-RSD-35-B2 | BB-RSD-55-B2 | BB-RSD-80-B2 |
BB-RSD-100-B2 |
Replacement | HPS 100W | HPS 200W | HPS 300W | HPS 400W |
Luminous Flux | 4550lm | 7150lm | 10400lm | 13000lm |
Light Source | SMD LED | |||
Luminous Efficacy | 130lm/w | |||
Voltage |
100-277VAC/50-60HZ 200-480VAC/50-60Hz available
|
|||
CRI | >80 | |||
Operation Temp. | -40 to +45℃ | |||
CCT | 2700K SW/3000K WW/4100K NW/5000K DW/5700K CW | |||
Life Span | 50,000 hours at 25℃ | |||
Cover | Standard:right-angle PC cover(130lm/w) Special:flat PC cover(170lm/w) | |||
Beam Angle | 100° *100° | |||
PF | >0.95 | |||
IP | 65 | |||
Warranty | 5 Years |
Dimensional Drawing

Installation

Step2.Put the fixture on the wall, drill 3 holes to get through the.
Step3.Get expansion screws into the holes, match the fixture to the bolts, then fix the fixture on the wall
by screws lastly get the PC cover and fixture housing back together.
Installation 2
Step1. Loosen screws and remove the front lens set carefully from the back plate.
Step2. Remove 1/2'' plug from where you intend to feed conduit.
Step3. Drilling out the holes (C) to secure it on the wall with choosing proper screws.
Step4. Finish wiring (Black for line, White for neutral and Green/Yellow Green for ground).
Step5. Replace the lens set on the hinge and finish connection, Close the lens set and tighten the
screws to fasten the lens set to the back plate.
By using our 100w LED wall pack light to replace 400W MH / HPS / HID / LPS ect traditional lamp
fixture for wall pack light,the customer is now able to save a lot per month from his electric bill.

1.Don't take the LED lamp apart.
2.The LED lamp must work under the right voltage according to the specification.

Related Keywords