T1000S Digital LED Controller
- Payment Type:
- T/T, Western Union
- Incoterm:
- FOB
- Min. Order:
- 10 Piece/Pieces
- Min. Order:
- 10 Piece/Pieces
- Delivery Time:
- 5 Days
- Transportation:
- Ocean, Land, Air
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | CHINA |
|---|---|
| Productivity: | 10000PCS/MONTH |
| Supply Ability: | 10000PCS/MONTH |
| Payment Type: | T/T,Western Union |
| Incoterm: | FOB |
| Certificate: | CE RoHs |
| Transportation: | Ocean,Land,Air |
T1000S Digital LED Controller:
1. 256 Gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller, a port output, may bring 1024/2048 light.
4. Off-line control, play back content stored in the SD card
5. T-1000C store a maximum of 16 documents
|
Support IC type |
Module in LedEdit software |
Pixel numbers |
remark |
|
LPD6803,D705,1101,6909, 6912 |
T-1000-6803 |
2048 pixel
|
|
|
LPD8806,LPD8809 |
T-1000-8806 |
2048 pixel |
|
|
TM1803,TM1804,TM1809,TM1812 |
T-1000-TM |
2048 pixel |
TM1804 and TM1809 low speed and high speed |
|
TM1903TM1904TM1909TM1912 |
T-1000-TM19 |
2048 pixel |
|
|
UCS6909UCS6912UCS7009UCS5903 |
T-1000-UCS-32 |
2048 pixel |
|
|
UCS1903UCS1909UCS1912 |
T-1000-UCS-256 |
2048 pixel |
low speed and high speed |
|
UCS3903 |
T-1000-UCS-1024 |
2048 pixel |
|
|
DMX512 |
T-1000-DMX |
170/512 pixel |
Compatible DMX512 |
|
WS2801,WS2803 |
T-1000-WS |
2048 pixel |
|
|
WS2811 |
T-1000-WS2811 |
2048 pixel |
low speed and high speed |
|
DS189 |
T-1000-DS189 |
2048 pixel |
|
|
TLS3001,TLS3002TLS3008 |
T-1000-TLS |
* pixel |
|
|
P9813 |
T-1000-P9813 |
2048 pixel |
|
|
SM16715 |
T-1000-SM16715 |
2048 pixel |
low speed and high speed |
|
SM16716 |
T-1000-SM16716 |
2048 pixel |
|
|
BS0901,BS0902 |
T-1000-0901 |
2048 pixel |
|
|
BS0815 |
T-1000-0815 |
2048 pixel |
Note:
Controller on the SD card can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply controller
Question 1: After power, the T-1000 ERROR indicator has been flashing without display output
Answer: The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:
a .SD card is empty, with no effect file
b .The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file led
c .SD card did not format to FAT before copy effect files
d .Please check the supply power voltage, the controller can be individually powered to exclude power reasons
f .Changing the SD card and then test to exclude the possibility of a bad SD card
Question 2: The controller is powered on, the indicator is normal, but no effect change in lighting
Answer: The reasons for this are as follows:
A. Check if the lighting′s signal line and the controller connected correctly
B.If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lighting′s and the controller′s ground together
C.check if the model chose during making display files on the SD card match the chips used in the lighting
Related Keywords
