Cute Size 8W Integrated Sensor LED Driver Constant Current
- Min. Order:
- 1
- Min. Order:
- 1
- Delivery Time:
- 30 Days
Your message must be between 20 to 2000 characters
Contact Now| Place of Origin: | China |
|---|
8W integrated sensor led driver dimming function for ceiling lamps
Description:
1, Built – in installation mode
2. Sensor part only take up 35x35mm on LED Board
3, Designed particularly for ceiling lamps
4. Constant current output 180mA
5, Detection area, time delay and dimming level can be precisely set via DIP switch
6, Integration technology of microwave motion sensor and LED driver.
7, Sensor DIM LED drivers, originally pioneered by Merrytek, are innovative products integrated with HF motion detector, daylight sensor and LED power supply.
8, The products supply a simple energy-saving solution for LED panel lights. As all control parts are integrated in a same housing, it is very easy to assemble and save labor cost.
9, On-off function and 3-step dimming function (Corridor function) are optional.
Optional Function
Specifications
|
Operating voltage |
220~240Vac, 50/60Hz |
|
Output constant current |
180mA |
|
Output voltage |
30-42Vdc |
|
Efficiency: |
≥ 72% |
|
Power factor |
≥ 0.9 |
|
Transmitting power |
< 0.5mW |
|
Power consumption |
≤ 1W(standby) |
|
HF system |
5.8GHz± 75MHz, ISM wave band |
|
Detector zone Max.(DxH) |
10m x 6m |
|
Detection sensitivity |
10% / 50% / 75% / 100% |
|
Hold time |
10s / 90s / 3min / 10min |
|
Stand-by dimming level |
40% / 50% selectable by dip switch |
|
Mounting height |
6m Max. |
|
Motion detection |
0.5-3m/s |
|
Detection angle |
150° (Wall installation) 360° (Ceiling installation) |
|
Operating temperature |
-25~45℃ |
|
IP rating |
IP20 |
|
Size |
82x44x27mm |
Application:
This sensor can be applied in Stairwell, Corridor, Balcony, Pathway, Washroom, kitchen, Subway, Basement etc.
Competitive Advantage:
1, Integrated microwave motion sensor and LED driver in a same housing, save the material cost and installation cost.
2, Dimming level 40% / 50% selectable by dip switch.
3, Built in microwave motion sensor, automatic switching and dimming based on motion.
4, Press-in type terminals (Input L, N, output LED+ LED-), easy assembling.
