PC Board Mountable Pressure Sensor with 0-100 mV Output

PC Board Mountable Pressure Sensor with 0-100 mV Output Model Number :  1210A-001G-3S
GENERAL DESCRIPTION   The 1210 1psi is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual-in-line configuration. It is intended for cost sensitive applications where excellent performance and longterm stability are required.
Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%.
Please refer to the 1210 standard datasheet for information on products with operating pressures greater than 1psi. For voltage excitation, please refer to the Model 1220. Benefit PC Board Mountable Pressure Sensor
0-100 mV Output
Current Excitation Gage and Differential Temperature Compensated Features: Dual-in-Line Package 1.0% Interchangeable Span (provided by gain set resistor) ±0.3% Non Linearity Solid State Reliability
Application Medical Instruments
Airspeed Measurement
Process Control
Factory Automation Leak Detection
PERFORMANCE SPECIFICATIONS Supply Current: 1.5 mA
Ambient Temperature: 25°C (unless otherwise specified) PRESSURE RANGE 0 – 1 psi

PARAMETERS	Min	Typ	Max	Unit
Full Scale Output Span	50	100	150	mV
Zero Pressure Output (Offset)	-2.0		2.0	mV
Pressure Non Linearity	-0.3		0.3	%Span
Pressure Hysteresis	-0.1	±0.01	0.1	%Span
Input/Output Resistance	1800		6500	Ω
Temperature Error – Span	-1.0	±0.5	1.0	%Span
Temperature Error – Zero	-1.0	±0.5	1.0	%Span
Thermal Hysteresis – Zero		±0.1		%Span
Long Term Stability (Offset & Span)		±0.2		%Span/year
Supply Current	0.5	1.5	2.0	mA
Response Time (10% to 90%)		1.0		mSec
Output Noise		1.0		µV p-p
Output Load Resistance	2			MΩ
Insulation Resistance (50Vdc)	50			MΩ
Pressure Overload			10	psi
Operating Temperature	-40		+125	℃
Storage Temperature	-50		+150	℃
Media	Non-Corrosive Dry Gases Compatible with wetted materials
Weight	3 grams

Notes
1. Output span of unamplified sensor.
2. Best fit straight line.
3. Temperature range: 0°C to 50°C with reference to 25°C.
4. Guarantees input/output ratiometricity for span.
5. For a zero-to-full scale pressure step change.
6. 10Hz to 1kHz.
7. Prevents increase of TC-Span due to output loading.
8. Wetted materials: glass, ceramic, silicon, fluorosilicone, nickel, gold and aluminum.
Additional Notes
Soldering leads pins: 250°C for 5 seconds, maximum. DIMENSIONS (TUBE VERSION)
Dimensions In Inches(mm) CONNECTIONS APPLICATION SCHEMATIC
ORDERING INFORMATION
*Barb vent port style only available in lead configuration type 3.