IR 44keys Waterproof remote controller for 60leds 5050 RGB led strip waterproof 14.4W/m

IR 44keys Waterproof  remote controller for 60leds 5050 RGB led strip waterproof 14.4W/m     Description : 44 key mini led  infrared controller (upgrade) multifunctional LED RGB controller adopts advanced microcomputer control, used to control a variety of the LED strip source lamp; has 34 functions of mode selection, low price, simple wiring, convenient to use; the mini led controller can control the change of function of the LED lamp, through the infrared remote controller express regulation, brightness adjustment static color selection, and various dynamic lighting effect.   Technical Specification : Working temperature: -20-60°C Waterpoof or not: Yes Power Voltage:DC5-24V Function Model:34models output:3circuits. Connecting:Common Anode External Dimension:45*15 mm Static Consumption voltage :<1W Load voltage:2A(each channel) Output Voltage:5V<30W,12V<72W,24V<144W   External Dimension : Controller Size :     Direction for using : 1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power; 2. Operation: you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote controller and receiver. 3.The key-press functions are shown in the table as below (in accordance with the key position order):   Supplement : About DIY key, when it’s pressed first time, will enter the DIY color mode, you can adjust the color per the 6 keys at above to increase or decrease the R/G/B color by yourself freely(if other key is pressed this time,will jump out from DIY color mode). And you can save the color which you have adjusted by pressing the DIY key once again. When next time this key is pressed, it will show the color you saved last time. There are 6 DIY keys, so you can save 6 colors you like. They are all Independent, have no effect each other. For example: if you press DIY key1 first, and then press DIY key2, DIY key1 will be invalid, until DIY key2 is pressed once again, current color will be saved.   Mini LED Controller RGB  control led strip  Common Problem :