XTM-109 series IMD/IML 3D punching machine

IMD/IML3D punching machine XTM109 punching machine
Machine features:  
1 adopts four-column.three-plate structure, the active plate paralleling with the working surface in high precision, four precision guided sets so that under the pressure of vertical high precision;
2 cylinder with adjustable, high precision positioning accuracy can reach 0.01MM dead;
3 safety design in the round, two hands operation with an emergency button at the same time using a high sensitivity of the system to ensure the safety of the fire safety system, to ensure the safety of work;
4 working table equipped with blanking and blowing device, improve production efficiency;
5 pressure, stroke, speed, close height can be adjusted according to requirements, easy to operate;
Equipped with casters and foot cup 6 under the working platform, can be easily moved, labor saving and high efficiency.
XTM109 series IMD punching machine
Product Description: (IMD hot press molding machine, mold decorative inlay injection molding, IML hot press molding machine, hydraulic IMD hot press molding machine, IMD equipment)
The IMD molding machine is my company for IMD industry (mold decorative mosaic injection technology) and film, pet, PVC sheet forming and the development of professional equipment, (Patent No. 200930164866.6), using a uniform way of far infrared radiation heating sheet. After constant temperature device, cylinder pressure to make instant molding.
Product features:
1 using 1-20MPa liquid pressure as the power source, not like the traditional equipment using compressed air. Because the hydraulic pressure is almost zero, so that the speed, the stability of the pressure is much higher than the ordinary IMD molding machine.
2 machine output in 5-50tf (Dun Li) optional, is the ordinary compressed air IMD molding machine can not be done.
3 the machine speed up to 250MM/ seconds, and the impact noise is not more than 80 dB, equivalent to the office of normal conversation. Ordinary compressed air IMD molding machine can not match.
4. The machine by high electrothermal conversion efficiency is more than 98%, rapid heating, thermal lag, uniform heating of the carbon fiber heating tube (from the far infrared, medicine known as the lifeline of human), its life (continuous burn) is equal to or more than 6000 hours, staff for a long period of operation the machine can strengthen the human body blood circulation, accelerate metabolism, enhance immunity.
5. The machine for the heating element for voltage control, close to the set temperature reduced the supply voltage, to ensure the heating pipe lit in a long-term state. Prolong its service life, display temperature and the actual temperature is controlled within plus or minus 1 degree Celsius.
6 this machine as long as the replacement of the mold, molding and punching can be used.
7. The hair around the heater with heat insulation cotton closed, standby power of external radiation accounted for only heating power 10% while conventional market IMD molding machine external radiation power up to 50%, in the hot summer 10 4kw conventional IMD equipment need equipped with 10 5p air conditioning. And our hydraulic IMD equipment just two pole.