Numerical control hydraulic press Single column hydraulic press

This machine have access to imported touch screen as input data, the data show that imported from the United States measuring force sensor as the pressure signal acquisition system can at a speed of 500 times per second on the pressure signal and displacement signal operation, making a variety of alarm, and curves are depicted. The upper and lower limit curves of displacement and pressure can be set in advance to compare with the current press loading value, and the position of the input can be arbitrarily pressed to obtain the interference resistance of the position during the last pressing.
Precision pressing machine product features:    
1 with 2-20MPA liquid pressure as the power source, external three-phase 50HZ AC220 or three-phase 60HZ AC380V AC power supply.
2 to liquid as the medium to transmit energy, the use of imported low noise gear oil pump.
3 the force sensor is used to measure the pressure force directly. The precision is the positive and negative 5N. pressure signal control system. The digital signal transmission is used to ensure the accuracy of the sensor.
3 equipment standby, sliding up and down when the noise is much smaller than similar products
4 solid open structure, which can make the body maintain enough steel, and has the most convenient operating space,
5. Break up and semi-automatic two control modes, manual can be pressing die stopped at arbitrary distance range, equipped with emergency recovery button, the installation of infrared hand device.
6. The series press pressing stroke by rotary encoder displacement is sent to the programmer, the program has been prepared for a good automatic control.
7 pressure, stroke, time, close height customers can adjust the.1. force on the touch screen to accurately display, the smallest unit of 0.01KN (using force sensor direct measurement
8 displacement of the smallest unit 0.01.
9 interference detection (preset 5 point position of the upper and lower limit of the force)
10 by the X axis Y axis displacement, force of force displacement curve.
11 can be pressed to save the data into EXCEL format,
12 can store 20 sets of setting parameters, 8 sets of different equipment action.
13 hydraulic system of built-in rack, the appearance of clean, lightweight, stable.
14 the series of hydraulic machinery output to 5-50tf (1tf=1000kgf=9.8KN), also can be customized according to customer requirements.