Brand New EXFO Visual Fault Locater FLS-241

Specifications Brand New EXFO Visual Fault Locater FLS-241

Bright red laser at 635 nm

5 km range

Brand New  EXFO Visual Fault Locater FLS-241       The Pocket Pal is the easiest way to identify fibers from end to end and locate polished connector endfaces. Its red laser shines through most yellow-jacketed fibers to help you pinpoint breaks, bends, faulty connectors, splices and other causes of signal loss. It has a reach of up to 5 km*.
The convenient FLS-240 locates faults visually by creating a bright red glow at the exact location of the fault on singlemode or multimode fibers. Robust Design
Due to its small size, light weight and simple but proven design, the Pocket Pal can accompany you anywhere. In your pocket or belt pouch, carry your FLS-240 to the most demanding environments. To ensure ruggedness, it features rubber seals, a fully enclosed laser head and a long-lasting On/Off switch. It has been tested to provide reliable
operation under intensive use and harsh conditions. Cost-Effective
The Pocket Pal's extremely high efficiency guarantees prolonged operation with two standard AAA alkaline batteries, typically providing 50 hours of uninterrupted operation. Priced to accommodate the tightest budgets, the FLS-240 Pocket Pal is a truly affordable way to locate faults in OTDR dead zones. Its effectiveness justifies purchasing one for just about every fiber technician.

Specification
Operation (Hz)	2 to 4
Wavelength (nm)	630 to 645
Emitter type	Laser
Power output (typical) (mW)	0.6
Distance range1 (typical) (km)	5
Operation mode	Pulsed and CW

 

GENERAL SPECIFICATIONS
Power supply	2 AAA alkaline batteries
Laser class	2
Battery life (h)    flashing	50
Length	17.5 cm
Maximum diameter	2.5 cm
Weight	empty 80 g, with batteries 120 g
Temperature	operating -10 C to 50 C, storage -30 C to 60 C

  STANDARD ACCESSORIES User guide, two AAA alkaline batteries, belt clip, and Certificate of Compliance.   Packaging & Shipping       Our Services   HONSERV main products as below: 1. FUSION SPLICER: USA Comway C10; Sumitomo (Type-81C); Fujikura (FSM-80S/70S/70R); Fitel S178A; HSV-6000 2.OTDR: EXFO (FTB-1/AXS-110/AXS-100/ FTB-200/FTB-500); JDSU (MTS-2000/4000/6000/8000); YOKOGAWA (AQ1200/AQ7275) 3. POWER METER (PPM-350C, FPM-300, HSV-300P); LIGHT SOURCE (FLS-300, HSV-300L); VFL (FLS-241, HSV-321); Multi Loss tester (FOT-930, FOT-302) 4. Anritsu site master S331D, S331L, S331E, S332E. 5. Fiber cleaver (CT-30A/CT-30/CT-05/FC-6S), adapter, battery, electrode, connector, fiber tool kits 6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc.. 7.Maintainance and repair, calibration service for the EXFO, JDSU, Sumitomo, Fujikura, Anritsu